[PATCH]: Add HC11/HC12 relocs in bfd

[Stephane Carrez <stcarrez at nerim dot fr>]

Hi!

The HC11/HC12 port uses additional relocs for linker relaxation and for specific
call instruction (for addresses in 16K memory bank window).  This patch adds
these relocs in bfd common part.

I've committed this patch on mainline.

	Stephane

2002-08-13  Stephane Carrez  <stcarrez@nerim.fr>

	* reloc.c (BFD_RELOC_M68HC11_RL_JUMP, BFD_RELOC_M68HC11_RL_GROUP,
	BFD_RELOC_M68HC11_LO16, BFD_RELOC_M68HC11_PAGE,
	BFD_RELOC_M68HC11_24): New relocs for 68HC11/68HC12.
	* bfd-in2.h: Regenerate.

Index: reloc.c
===================================================================
RCS file: /cvs/src/src/bfd/reloc.c,v
retrieving revision 1.63
diff -u -p -r1.63 reloc.c
--- reloc.c	17 Jul 2002 14:15:49 -0000	1.63
+++ reloc.c	13 Aug 2002 20:01:25 -0000
@@ -3359,17 +3359,53 @@ ENUM
   BFD_RELOC_M68HC11_HI8
 ENUMDOC
   Motorola 68HC11 reloc.
-  This is the 8 bits high part of an absolute address.
+  This is the 8 bit high part of an absolute address.
 ENUM
   BFD_RELOC_M68HC11_LO8
 ENUMDOC
   Motorola 68HC11 reloc.
-  This is the 8 bits low part of an absolute address.
+  This is the 8 bit low part of an absolute address.
 ENUM
   BFD_RELOC_M68HC11_3B
 ENUMDOC
   Motorola 68HC11 reloc.
-  This is the 3 bits of a value.
+  This is the 3 bit of a value.
+ENUM
+  BFD_RELOC_M68HC11_RL_JUMP
+ENUMDOC
+  Motorola 68HC11 reloc.
+  This reloc marks the beginning of a jump/call instruction.
+  It is used for linker relaxation to correctly identify beginning
+  of instruction and change some branchs to use PC-relative
+  addressing mode.
+ENUM
+  BFD_RELOC_M68HC11_RL_GROUP
+ENUMDOC
+  Motorola 68HC11 reloc.
+  This reloc marks a group of several instructions that gcc generates
+  and for which the linker relaxation pass can modify and/or remove
+  some of them.
+ENUM
+  BFD_RELOC_M68HC11_LO16
+ENUMDOC
+  Motorola 68HC11 reloc.
+  This is the 16-bit lower part of an address.  It is used for 'call'
+  instruction to specify the symbol address without any special
+  transformation (due to memory bank window).
+ENUM
+  BFD_RELOC_M68HC11_PAGE
+ENUMDOC
+  Motorola 68HC11 reloc.
+  This is a 8-bit reloc that specifies the page number of an address.
+  It is used by 'call' instruction to specify the page number of
+  the symbol.
+ENUM
+  BFD_RELOC_M68HC11_24
+ENUMDOC
+  Motorola 68HC11 reloc.
+  This is a 24-bit reloc that represents the address with a 16-bit
+  value and a 8-bit page number.  The symbol address is transformed
+  to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
 
 ENUM
   BFD_RELOC_CRIS_BDISP8
Index: bfd-in2.h
===================================================================
RCS file: /cvs/src/src/bfd/bfd-in2.h,v
retrieving revision 1.164
diff -u -p -r1.164 bfd-in2.h
--- bfd-in2.h	9 Aug 2002 15:38:21 -0000	1.164
+++ bfd-in2.h	13 Aug 2002 20:01:34 -0000
@@ -3040,16 +3040,47 @@ this offset in the reloc's section offse
   BFD_RELOC_IA64_LTOFF_DTPREL22,
 
 /* Motorola 68HC11 reloc.
-This is the 8 bits high part of an absolute address.  */
+This is the 8 bit high part of an absolute address.  */
   BFD_RELOC_M68HC11_HI8,
 
 /* Motorola 68HC11 reloc.
-This is the 8 bits low part of an absolute address.  */
+This is the 8 bit low part of an absolute address.  */
   BFD_RELOC_M68HC11_LO8,
 
 /* Motorola 68HC11 reloc.
-This is the 3 bits of a value.  */
+This is the 3 bit of a value.  */
   BFD_RELOC_M68HC11_3B,
+
+/* Motorola 68HC11 reloc.
+This reloc marks the beginning of a jump/call instruction.
+It is used for linker relaxation to correctly identify beginning
+of instruction and change some branchs to use PC-relative
+addressing mode.  */
+  BFD_RELOC_M68HC11_RL_JUMP,
+
+/* Motorola 68HC11 reloc.
+This reloc marks a group of several instructions that gcc generates
+and for which the linker relaxation pass can modify and/or remove
+some of them.  */
+  BFD_RELOC_M68HC11_RL_GROUP,
+
+/* Motorola 68HC11 reloc.
+This is the 16-bit lower part of an address.  It is used for 'call'
+instruction to specify the symbol address without any special
+transformation (due to memory bank window).  */
+  BFD_RELOC_M68HC11_LO16,
+
+/* Motorola 68HC11 reloc.
+This is a 8-bit reloc that specifies the page number of an address.
+It is used by 'call' instruction to specify the page number of
+the symbol.  */
+  BFD_RELOC_M68HC11_PAGE,
+
+/* Motorola 68HC11 reloc.
+This is a 24-bit reloc that represents the address with a 16-bit
+value and a 8-bit page number.  The symbol address is transformed
+to follow the 16K memory bank of 68HC12 (seen as mapped in the window).  */
+  BFD_RELOC_M68HC11_24,
 
 /* These relocs are only used within the CRIS assembler.  They are not
 (at present) written to any object files.  */