This is the mail archive of the
binutils@sources.redhat.com
mailing list for the binutils project.
Re: RFC/RFT: split up pexecute.c
DJ Delorie <dj@redhat.com> writes:
> EMX defines OS2. MPW is not currently supported by configure anyway,
> so you can just leave that source file unused. I believe the
> remainder are correct.
Okay. What do you think of this patch?
zw
* Makefile.in (CFILES): Remove pexecute.c, add pex-*.c.
(REQUIRED_OFILES): Remove pexecute.o, add @pexecute@.
(CONFIGURED_OFILES): Add pex-*.o.
Regenerate dependencies.
* configure.in: Change AC_INIT argument to xmalloc.c.
Calculate and substitute @pexecute@ depending on host triple.
* pexecute.c: Removed; contents split into...
* pex-common.h, pex-cygwin.c, pex-djgpp.c, pex-mpw.c,
pex-msdos.c, pex-os2.c, pex-unix.c, pex-win32.c:
... these new files.
===================================================================
Index: Makefile.in
--- Makefile.in 9 Jan 2003 08:10:57 -0000 1.80
+++ Makefile.in 23 Jan 2003 18:37:34 -0000
@@ -140,7 +140,10 @@ CFILES = alloca.c argv.c asprintf.c atex
make-temp-file.c md5.c memchr.c memcmp.c memcpy.c memmove.c \
memset.c mkstemps.c \
objalloc.c obstack.c \
- partition.c pexecute.c putenv.c \
+ partition.c \
+ pex-cygwin.c pex-djgpp.c pex-mpw.c pex-msdos.c pex-os2.c \
+ pex-unix.c pex-win32.c \
+ putenv.c \
random.c regex.c rename.c rindex.c \
safe-ctype.c setenv.c sigsetmask.c sort.c spaces.c \
splay-tree.c strcasecmp.c strchr.c strdup.c strerror.c \
@@ -164,7 +167,7 @@ REQUIRED_OFILES = regex.o cplus-dem.o cp
make-relative-prefix.o \
make-temp-file.o \
objalloc.o obstack.o \
- partition.o pexecute.o \
+ partition.o @pexecute@ \
safe-ctype.o sort.o spaces.o splay-tree.o strerror.o \
strsignal.o \
ternary.o \
@@ -181,6 +184,8 @@ CONFIGURED_OFILES = asprintf.o atexit.o
getcwd.o getpagesize.o \
index.o insque.o \
memchr.o memcmp.o memcpy.o memmove.o memset.o mkstemps.o \
+ pex-cygwin.o pex-djgpp.o pex-mpw.o pex-msdos.o pex-os2.o \
+ pex-unix.o pex-win32.o \
putenv.o \
random.o rename.o rindex.o \
setenv.o sigsetmask.o strcasecmp.o strchr.o strdup.o \
@@ -418,7 +423,7 @@ copysign.o: $(INCDIR)/ansidecl.h
cp-demangle.o: config.h $(INCDIR)/ansidecl.h $(INCDIR)/demangle.h \
$(INCDIR)/dyn-string.h $(INCDIR)/getopt.h $(INCDIR)/libiberty.h
cplus-dem.o: config.h $(INCDIR)/ansidecl.h $(INCDIR)/demangle.h \
- $(INCDIR)/getopt.h $(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h
+ $(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h
dyn-string.o: config.h $(INCDIR)/ansidecl.h $(INCDIR)/dyn-string.h \
$(INCDIR)/libiberty.h
fdmatch.o: $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
@@ -437,7 +442,8 @@ hashtab.o: config.h $(INCDIR)/ansidecl.h
hex.o: $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
lbasename.o: $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
$(INCDIR)/safe-ctype.h
-make-relative-prefix.o: config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+make-relative-prefix.o: config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
make-temp-file.o: config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
md5.o: config.h $(INCDIR)/ansidecl.h $(INCDIR)/md5.h
memchr.o: $(INCDIR)/ansidecl.h
@@ -450,8 +456,7 @@ objalloc.o: config.h $(INCDIR)/ansidecl.
obstack.o: config.h $(INCDIR)/obstack.h
partition.o: config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
$(INCDIR)/partition.h
-pexecute.o: config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
- $(INCDIR)/safe-ctype.h
+pex-msdos.o: $(INCDIR)/safe-ctype.h
putenv.o: config.h $(INCDIR)/ansidecl.h
random.o: $(INCDIR)/ansidecl.h
regex.o: config.h $(INCDIR)/xregex.h $(INCDIR)/xregex2.h
===================================================================
Index: configure.in
--- configure.in 1 Jul 2002 05:38:50 -0000 1.52
+++ configure.in 23 Jan 2003 18:37:34 -0000
@@ -1,7 +1,7 @@
dnl Process this file with autoconf to produce a configure script
AC_PREREQ(2.13)
-AC_INIT(pexecute.c)
+AC_INIT(xmalloc.c)
# This works around the fact that libtool configuration may change LD
# for this particular configuration, but some shells, instead of
@@ -424,6 +424,17 @@ if test -z "${setobjs}"; then
done
AC_CHECK_FUNCS($checkfuncs)
fi
+
+# Figure out which version of pexecute to use.
+case "${host}" in
+ *-*-cygwin*) pexecute=pex-cygwin.o ;;
+ *-*-mingw* | *-*-winnt*) pexecute=pex-win32.o ;;
+ *-*-msdosdjgpp*) pexecute=pex-djgpp.o ;;
+ *-*-msdos*) pexecute=pex-msdos.o ;;
+ *-*-os2-emx*) pexecute=pex-os2.o ;;
+ *) pexecute=pex-unix.o ;;
+esac
+AC_SUBST(pexecute)
libiberty_AC_FUNC_STRNCMP
===================================================================
Index: pex-common.h
--- pex-common.h 1 Jan 1970 00:00:00 -0000
+++ pex-common.h 23 Jan 2003 18:37:34 -0000
@@ -0,0 +1,104 @@
+/* Utilities to execute a program in a subprocess (possibly linked by pipes
+ with other subprocesses), and wait for it. Shared logic and documentation.
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
+ Free Software Foundation, Inc.
+
+This file is part of the libiberty library.
+Libiberty is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+Libiberty is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with libiberty; see the file COPYING.LIB. If not,
+write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+/* pexecute: execute a program.
+
+ @deftypefn Extension int pexecute (const char *@var{program}, char * const *@var{argv}, const char *@var{this_pname}, const char *@var{temp_base}, char **@var{errmsg_fmt}, char **@var{errmsg_arg}, int flags)
+
+ Executes a program.
+
+ @var{program} and @var{argv} are the arguments to
+ @code{execv}/@code{execvp}.
+
+ @var{this_pname} is name of the calling program (i.e., @code{argv[0]}).
+
+ @var{temp_base} is the path name, sans suffix, of a temporary file to
+ use if needed. This is currently only needed for MS-DOS ports that
+ don't use @code{go32} (do any still exist?). Ports that don't need it
+ can pass @code{NULL}.
+
+ (@code{@var{flags} & PEXECUTE_SEARCH}) is non-zero if @env{PATH}
+ should be searched (??? It's not clear that GCC passes this flag
+ correctly). (@code{@var{flags} & PEXECUTE_FIRST}) is nonzero for the
+ first process in chain. (@code{@var{flags} & PEXECUTE_FIRST}) is
+ nonzero for the last process in chain. The first/last flags could be
+ simplified to only mark the last of a chain of processes but that
+ requires the caller to always mark the last one (and not give up
+ early if some error occurs). It's more robust to require the caller
+ to mark both ends of the chain.
+
+ The result is the pid on systems like Unix where we
+ @code{fork}/@code{exec} and on systems like WIN32 and OS/2 where we
+ use @code{spawn}. It is up to the caller to wait for the child.
+
+ The result is the @code{WEXITSTATUS} on systems like MS-DOS where we
+ @code{spawn} and wait for the child here.
+
+ Upon failure, @var{errmsg_fmt} and @var{errmsg_arg} are set to the
+ text of the error message with an optional argument (if not needed,
+ @var{errmsg_arg} is set to @code{NULL}), and @minus{}1 is returned.
+ @code{errno} is available to the caller to use.
+
+ @end deftypefn
+
+ @deftypefn Extension int pwait (int @var{pid}, int *@var{status}, int @var{flags})
+
+ Waits for a program started by @code{pexecute} to finish.
+
+ @var{pid} is the process id of the task to wait for. @var{status} is
+ the `status' argument to wait. @var{flags} is currently unused
+ (allows future enhancement without breaking upward compatibility).
+ Pass 0 for now.
+
+ The result is the pid of the child reaped, or -1 for failure
+ (@code{errno} says why).
+
+ On systems that don't support waiting for a particular child,
+ @var{pid} is ignored. On systems like MS-DOS that don't really
+ multitask @code{pwait} is just a mechanism to provide a consistent
+ interface for the caller.
+
+ @end deftypefn
+
+ @undocumented pfinish
+
+ pfinish: finish generation of script
+
+ pfinish is necessary for systems like MPW where a script is generated
+ that runs the requested programs. */
+
+#include "config.h"
+#include "libiberty.h"
+
+#define install_error_msg "installation problem, cannot exec `%s'"
+
+/* stdin file number. */
+#define STDIN_FILE_NO 0
+
+/* stdout file number. */
+#define STDOUT_FILE_NO 1
+
+/* value of `pipe': port index for reading. */
+#define READ_PORT 0
+
+/* value of `pipe': port index for writing. */
+#define WRITE_PORT 1
+
===================================================================
Index: pex-cygwin.c
--- pex-cygwin.c 1 Jan 1970 00:00:00 -0000
+++ pex-cygwin.c 23 Jan 2003 18:37:34 -0000
@@ -0,0 +1,132 @@
+/* Utilities to execute a program in a subprocess (possibly linked by pipes
+ with other subprocesses), and wait for it. Cygwin specialization.
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
+ Free Software Foundation, Inc.
+
+This file is part of the libiberty library.
+Libiberty is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+Libiberty is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with libiberty; see the file COPYING.LIB. If not,
+write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#include "pex-common.h"
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#ifdef HAVE_SYS_WAIT_H
+#include <sys/wait.h>
+#endif
+
+#include <process.h>
+#include <io.h>
+#include <fcntl.h>
+#include <signal.h>
+
+extern int _spawnv ();
+extern int _spawnvp ();
+
+/* Win32 supports pipes, and Cygwin provides waitpid. */
+
+int
+pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
+ const char *program;
+ char * const *argv;
+ const char *this_pname;
+ const char *temp_base;
+ char **errmsg_fmt, **errmsg_arg;
+ int flags;
+{
+ int pid;
+ int pdes[2], org_stdin, org_stdout;
+ int input_desc, output_desc;
+ int retries, sleep_interval;
+
+ /* Pipe waiting from last process, to be used as input for the next one.
+ Value is STDIN_FILE_NO if no pipe is waiting
+ (i.e. the next command is the first of a group). */
+ static int last_pipe_input;
+
+ /* If this is the first process, initialize. */
+ if (flags & PEXECUTE_FIRST)
+ last_pipe_input = STDIN_FILE_NO;
+
+ input_desc = last_pipe_input;
+
+ /* If this isn't the last process, make a pipe for its output,
+ and record it as waiting to be the input to the next process. */
+ if (! (flags & PEXECUTE_LAST))
+ {
+ if (_pipe (pdes, 256, O_BINARY) < 0)
+ {
+ *errmsg_fmt = "pipe";
+ *errmsg_arg = NULL;
+ return -1;
+ }
+ output_desc = pdes[WRITE_PORT];
+ last_pipe_input = pdes[READ_PORT];
+ }
+ else
+ {
+ /* Last process. */
+ output_desc = STDOUT_FILE_NO;
+ last_pipe_input = STDIN_FILE_NO;
+ }
+
+ if (input_desc != STDIN_FILE_NO)
+ {
+ org_stdin = dup (STDIN_FILE_NO);
+ dup2 (input_desc, STDIN_FILE_NO);
+ close (input_desc);
+ }
+
+ if (output_desc != STDOUT_FILE_NO)
+ {
+ org_stdout = dup (STDOUT_FILE_NO);
+ dup2 (output_desc, STDOUT_FILE_NO);
+ close (output_desc);
+ }
+
+ pid = (flags & PEXECUTE_SEARCH ? _spawnvp : _spawnv)
+ (_P_NOWAIT, program, argv);
+
+ if (input_desc != STDIN_FILE_NO)
+ {
+ dup2 (org_stdin, STDIN_FILE_NO);
+ close (org_stdin);
+ }
+
+ if (output_desc != STDOUT_FILE_NO)
+ {
+ dup2 (org_stdout, STDOUT_FILE_NO);
+ close (org_stdout);
+ }
+
+ if (pid == -1)
+ {
+ *errmsg_fmt = install_error_msg;
+ *errmsg_arg = program;
+ return -1;
+ }
+
+ return pid;
+}
+
+int
+pwait (pid, status, flags)
+ int pid;
+ int *status;
+ int flags ATTRIBUTE_UNUSED;
+{
+ return waitpid (pid, status, 0);
+}
===================================================================
Index: pex-djgpp.c
--- pex-djgpp.c 1 Jan 1970 00:00:00 -0000
+++ pex-djgpp.c 23 Jan 2003 18:37:34 -0000
@@ -0,0 +1,103 @@
+/* Utilities to execute a program in a subprocess (possibly linked by pipes
+ with other subprocesses), and wait for it. DJGPP specialization.
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
+ Free Software Foundation, Inc.
+
+This file is part of the libiberty library.
+Libiberty is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+Libiberty is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with libiberty; see the file COPYING.LIB. If not,
+write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#include "pex-common.h"
+
+#include <stdio.h>
+#include <errno.h>
+#ifdef NEED_DECLARATION_ERRNO
+extern int errno;
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <process.h>
+
+/* Use ECHILD if available, otherwise use EINVAL. */
+#ifdef ECHILD
+#define PWAIT_ERROR ECHILD
+#else
+#define PWAIT_ERROR EINVAL
+#endif
+
+/* MSDOS doesn't multitask, but for the sake of a consistent interface
+ the code behaves like it does. pexecute runs the program, tucks the
+ exit code away, and returns a "pid". pwait must be called to fetch the
+ exit code. */
+
+/* For communicating information from pexecute to pwait. */
+static int last_pid = 0;
+static int last_status = 0;
+static int last_reaped = 0;
+
+int
+pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
+ const char *program;
+ char * const *argv;
+ const char *this_pname;
+ const char *temp_base;
+ char **errmsg_fmt, **errmsg_arg;
+ int flags;
+{
+ int rc;
+
+ last_pid++;
+ if (last_pid < 0)
+ last_pid = 1;
+
+ if ((flags & PEXECUTE_ONE) != PEXECUTE_ONE)
+ abort ();
+
+ /* ??? What are the possible return values from spawnv? */
+ rc = (flags & PEXECUTE_SEARCH ? spawnvp : spawnv) (P_WAIT, program, argv);
+
+ if (rc == -1)
+ {
+ *errmsg_fmt = install_error_msg;
+ *errmsg_arg = (char *)program;
+ return -1;
+ }
+
+ /* Tuck the status away for pwait, and return a "pid". */
+ last_status = rc << 8;
+ return last_pid;
+}
+
+int
+pwait (pid, status, flags)
+ int pid;
+ int *status;
+ int flags;
+{
+ /* On MSDOS each pexecute must be followed by its associated pwait. */
+ if (pid != last_pid
+ /* Called twice for the same child? */
+ || pid == last_reaped)
+ {
+ errno = PWAIT_ERROR;
+ return -1;
+ }
+ /* ??? Here's an opportunity to canonicalize the values in STATUS.
+ Needed? */
+ *status = (last_status >> 8);
+ last_reaped = last_pid;
+ return last_pid;
+}
===================================================================
Index: pex-mpw.c
--- pex-mpw.c 1 Jan 1970 00:00:00 -0000
+++ pex-mpw.c 23 Jan 2003 18:37:34 -0000
@@ -0,0 +1,161 @@
+/* Utilities to execute a program in a subprocess (possibly linked by pipes
+ with other subprocesses), and wait for it. MPW specialization.
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
+ Free Software Foundation, Inc.
+
+This file is part of the libiberty library.
+Libiberty is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+Libiberty is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with libiberty; see the file COPYING.LIB. If not,
+write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#include "pex-common.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#endif
+
+/* MPW pexecute doesn't actually run anything; instead, it writes out
+ script commands that, when run, will do the actual executing.
+
+ For example, in GCC's case, GCC will write out several script commands:
+
+ cpp ...
+ cc1 ...
+ as ...
+ ld ...
+
+ and then exit. None of the above programs will have run yet. The task
+ that called GCC will then execute the script and cause cpp,etc. to run.
+ The caller must invoke pfinish before calling exit. This adds
+ the finishing touches to the generated script. */
+
+static int first_time = 1;
+
+extern void mpwify_filename PARAMS ((const char *, char *));
+
+int
+pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
+ const char *program;
+ char * const *argv;
+ const char *this_pname;
+ const char *temp_base;
+ char **errmsg_fmt, **errmsg_arg;
+ int flags;
+{
+ char tmpprogram[255];
+ char *cp, *tmpname;
+ int i;
+
+ mpwify_filename (program, tmpprogram);
+ if (first_time)
+ {
+ printf ("Set Failed 0\n");
+ first_time = 0;
+ }
+
+ fputs ("If {Failed} == 0\n", stdout);
+ /* If being verbose, output a copy of the command. It should be
+ accurate enough and escaped enough to be "clickable". */
+ if (flags & PEXECUTE_VERBOSE)
+ {
+ fputs ("\tEcho ", stdout);
+ fputc ('\'', stdout);
+ fputs (tmpprogram, stdout);
+ fputc ('\'', stdout);
+ fputc (' ', stdout);
+ for (i=1; argv[i]; i++)
+ {
+ fputc ('\'', stdout);
+ /* See if we have an argument that needs fixing. */
+ if (strchr(argv[i], '/'))
+ {
+ tmpname = (char *) xmalloc (256);
+ mpwify_filename (argv[i], tmpname);
+ argv[i] = tmpname;
+ }
+ for (cp = argv[i]; *cp; cp++)
+ {
+ /* Write an Option-d escape char in front of special chars. */
+ if (strchr("'+", *cp))
+ fputc ('\266', stdout);
+ fputc (*cp, stdout);
+ }
+ fputc ('\'', stdout);
+ fputc (' ', stdout);
+ }
+ fputs ("\n", stdout);
+ }
+ fputs ("\t", stdout);
+ fputs (tmpprogram, stdout);
+ fputc (' ', stdout);
+
+ for (i=1; argv[i]; i++)
+ {
+ /* See if we have an argument that needs fixing. */
+ if (strchr(argv[i], '/'))
+ {
+ tmpname = (char *) xmalloc (256);
+ mpwify_filename (argv[i], tmpname);
+ argv[i] = tmpname;
+ }
+ if (strchr (argv[i], ' '))
+ fputc ('\'', stdout);
+ for (cp = argv[i]; *cp; cp++)
+ {
+ /* Write an Option-d escape char in front of special chars. */
+ if (strchr("'+", *cp))
+ fputc ('\266', stdout);
+ fputc (*cp, stdout);
+ }
+ if (strchr (argv[i], ' '))
+ fputc ('\'', stdout);
+ fputc (' ', stdout);
+ }
+
+ fputs ("\n", stdout);
+
+ /* Output commands that arrange to clean up and exit if a failure occurs.
+ We have to be careful to collect the status from the program that was
+ run, rather than some other script command. Also, we don't exit
+ immediately, since necessary cleanups are at the end of the script. */
+ fputs ("\tSet TmpStatus {Status}\n", stdout);
+ fputs ("\tIf {TmpStatus} != 0\n", stdout);
+ fputs ("\t\tSet Failed {TmpStatus}\n", stdout);
+ fputs ("\tEnd\n", stdout);
+ fputs ("End\n", stdout);
+
+ /* We're just composing a script, can't fail here. */
+ return 0;
+}
+
+int
+pwait (pid, status, flags)
+ int pid;
+ int *status;
+ int flags;
+{
+ *status = 0;
+ return 0;
+}
+
+/* Write out commands that will exit with the correct error code
+ if something in the script failed. */
+
+void
+pfinish ()
+{
+ printf ("\tExit \"{Failed}\"\n");
+}
+
===================================================================
Index: pex-msdos.c
--- pex-msdos.c 1 Jan 1970 00:00:00 -0000
+++ pex-msdos.c 23 Jan 2003 18:37:34 -0000
@@ -0,0 +1,147 @@
+/* Utilities to execute a program in a subprocess (possibly linked by pipes
+ with other subprocesses), and wait for it. Generic MSDOS specialization.
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
+ Free Software Foundation, Inc.
+
+This file is part of the libiberty library.
+Libiberty is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+Libiberty is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with libiberty; see the file COPYING.LIB. If not,
+write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#include "pex-common.h"
+
+#include <stdio.h>
+#include <errno.h>
+#ifdef NEED_DECLARATION_ERRNO
+extern int errno;
+#endif
+#ifdef HAVE_STRING_H
+#include <string.h>
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
+#include "safe-ctype.h"
+#include <process.h>
+
+/* MSDOS doesn't multitask, but for the sake of a consistent interface
+ the code behaves like it does. pexecute runs the program, tucks the
+ exit code away, and returns a "pid". pwait must be called to fetch the
+ exit code. */
+
+/* For communicating information from pexecute to pwait. */
+static int last_pid = 0;
+static int last_status = 0;
+static int last_reaped = 0;
+
+int
+pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
+ const char *program;
+ char * const *argv;
+ const char *this_pname;
+ const char *temp_base;
+ char **errmsg_fmt, **errmsg_arg;
+ int flags;
+{
+ int rc;
+ char *scmd, *rf;
+ FILE *argfile;
+ int i, el = flags & PEXECUTE_SEARCH ? 4 : 0;
+
+ last_pid++;
+ if (last_pid < 0)
+ last_pid = 1;
+
+ if ((flags & PEXECUTE_ONE) != PEXECUTE_ONE)
+ abort ();
+
+ if (temp_base == 0)
+ temp_base = choose_temp_base ();
+ scmd = (char *) xmalloc (strlen (program) + strlen (temp_base) + 6 + el);
+ rf = scmd + strlen(program) + 2 + el;
+ sprintf (scmd, "%s%s @%s.gp", program,
+ (flags & PEXECUTE_SEARCH ? ".exe" : ""), temp_base);
+ argfile = fopen (rf, "w");
+ if (argfile == 0)
+ {
+ int errno_save = errno;
+ free (scmd);
+ errno = errno_save;
+ *errmsg_fmt = "cannot open `%s.gp'";
+ *errmsg_arg = temp_base;
+ return -1;
+ }
+
+ for (i=1; argv[i]; i++)
+ {
+ char *cp;
+ for (cp = argv[i]; *cp; cp++)
+ {
+ if (*cp == '"' || *cp == '\'' || *cp == '\\' || ISSPACE (*cp))
+ fputc ('\\', argfile);
+ fputc (*cp, argfile);
+ }
+ fputc ('\n', argfile);
+ }
+ fclose (argfile);
+
+ rc = system (scmd);
+
+ {
+ int errno_save = errno;
+ remove (rf);
+ free (scmd);
+ errno = errno_save;
+ }
+
+ if (rc == -1)
+ {
+ *errmsg_fmt = install_error_msg;
+ *errmsg_arg = (char *)program;
+ return -1;
+ }
+
+ /* Tuck the status away for pwait, and return a "pid". */
+ last_status = rc << 8;
+ return last_pid;
+}
+
+/* Use ECHILD if available, otherwise use EINVAL. */
+#ifdef ECHILD
+#define PWAIT_ERROR ECHILD
+#else
+#define PWAIT_ERROR EINVAL
+#endif
+
+int
+pwait (pid, status, flags)
+ int pid;
+ int *status;
+ int flags;
+{
+ /* On MSDOS each pexecute must be followed by its associated pwait. */
+ if (pid != last_pid
+ /* Called twice for the same child? */
+ || pid == last_reaped)
+ {
+ errno = PWAIT_ERROR;
+ return -1;
+ }
+ /* ??? Here's an opportunity to canonicalize the values in STATUS.
+ Needed? */
+ *status = last_status;
+ last_reaped = last_pid;
+ return last_pid;
+}
===================================================================
Index: pex-os2.c
--- pex-os2.c 1 Jan 1970 00:00:00 -0000
+++ pex-os2.c 23 Jan 2003 18:37:34 -0000
@@ -0,0 +1,72 @@
+/* Utilities to execute a program in a subprocess (possibly linked by pipes
+ with other subprocesses), and wait for it. OS/2 specialization.
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
+ Free Software Foundation, Inc.
+
+This file is part of the libiberty library.
+Libiberty is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+Libiberty is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with libiberty; see the file COPYING.LIB. If not,
+write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#include "pex-common.h"
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_SYS_WAIT_H
+#include <sys/wait.h>
+#endif
+
+/* ??? Does OS2 have process.h? */
+extern int spawnv ();
+extern int spawnvp ();
+
+int
+pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
+ const char *program;
+ char * const *argv;
+ const char *this_pname;
+ const char *temp_base;
+ char **errmsg_fmt, **errmsg_arg;
+ int flags;
+{
+ int pid;
+
+ if ((flags & PEXECUTE_ONE) != PEXECUTE_ONE)
+ abort ();
+ /* ??? Presumably 1 == _P_NOWAIT. */
+ pid = (flags & PEXECUTE_SEARCH ? spawnvp : spawnv) (1, program, argv);
+ if (pid == -1)
+ {
+ *errmsg_fmt = install_error_msg;
+ *errmsg_arg = program;
+ return -1;
+ }
+ return pid;
+}
+
+int
+pwait (pid, status, flags)
+ int pid;
+ int *status;
+ int flags;
+{
+ /* ??? Here's an opportunity to canonicalize the values in STATUS.
+ Needed? */
+ int pid = wait (status);
+ return pid;
+}
===================================================================
Index: pex-unix.c
--- pex-unix.c 1 Jan 1970 00:00:00 -0000
+++ pex-unix.c 23 Jan 2003 18:37:34 -0000
@@ -0,0 +1,166 @@
+/* Utilities to execute a program in a subprocess (possibly linked by pipes
+ with other subprocesses), and wait for it. Generic Unix version
+ (also used for UWIN and VMS).
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
+ Free Software Foundation, Inc.
+
+This file is part of the libiberty library.
+Libiberty is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+Libiberty is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with libiberty; see the file COPYING.LIB. If not,
+write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#include "pex-common.h"
+
+#include <stdio.h>
+#include <errno.h>
+#ifdef NEED_DECLARATION_ERRNO
+extern int errno;
+#endif
+#ifdef HAVE_STRING_H
+#include <string.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_SYS_WAIT_H
+#include <sys/wait.h>
+#endif
+
+#ifndef HAVE_WAITPID
+#define waitpid(pid, status, flags) wait(status)
+#endif
+
+extern int execv ();
+extern int execvp ();
+
+int
+pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
+ const char *program;
+ char * const *argv;
+ const char *this_pname;
+ const char *temp_base ATTRIBUTE_UNUSED;
+ char **errmsg_fmt, **errmsg_arg;
+ int flags;
+{
+ int (*func)() = (flags & PEXECUTE_SEARCH ? execvp : execv);
+ int pid;
+ int pdes[2];
+ int input_desc, output_desc;
+ int retries, sleep_interval;
+ /* Pipe waiting from last process, to be used as input for the next one.
+ Value is STDIN_FILE_NO if no pipe is waiting
+ (i.e. the next command is the first of a group). */
+ static int last_pipe_input;
+
+ /* If this is the first process, initialize. */
+ if (flags & PEXECUTE_FIRST)
+ last_pipe_input = STDIN_FILE_NO;
+
+ input_desc = last_pipe_input;
+
+ /* If this isn't the last process, make a pipe for its output,
+ and record it as waiting to be the input to the next process. */
+ if (! (flags & PEXECUTE_LAST))
+ {
+ if (pipe (pdes) < 0)
+ {
+ *errmsg_fmt = "pipe";
+ *errmsg_arg = NULL;
+ return -1;
+ }
+ output_desc = pdes[WRITE_PORT];
+ last_pipe_input = pdes[READ_PORT];
+ }
+ else
+ {
+ /* Last process. */
+ output_desc = STDOUT_FILE_NO;
+ last_pipe_input = STDIN_FILE_NO;
+ }
+
+ /* Fork a subprocess; wait and retry if it fails. */
+ sleep_interval = 1;
+ pid = -1;
+ for (retries = 0; retries < 4; retries++)
+ {
+ pid = fork ();
+ if (pid >= 0)
+ break;
+ sleep (sleep_interval);
+ sleep_interval *= 2;
+ }
+
+ switch (pid)
+ {
+ case -1:
+ *errmsg_fmt = "fork";
+ *errmsg_arg = NULL;
+ return -1;
+
+ case 0: /* child */
+ /* Move the input and output pipes into place, if necessary. */
+ if (input_desc != STDIN_FILE_NO)
+ {
+ close (STDIN_FILE_NO);
+ dup (input_desc);
+ close (input_desc);
+ }
+ if (output_desc != STDOUT_FILE_NO)
+ {
+ close (STDOUT_FILE_NO);
+ dup (output_desc);
+ close (output_desc);
+ }
+
+ /* Close the parent's descs that aren't wanted here. */
+ if (last_pipe_input != STDIN_FILE_NO)
+ close (last_pipe_input);
+
+ /* Exec the program. */
+ (*func) (program, argv);
+
+ fprintf (stderr, "%s: ", this_pname);
+ fprintf (stderr, install_error_msg, program);
+ fprintf (stderr, ": %s\n", xstrerror (errno));
+ exit (-1);
+ /* NOTREACHED */
+ return 0;
+
+ default:
+ /* In the parent, after forking.
+ Close the descriptors that we made for this child. */
+ if (input_desc != STDIN_FILE_NO)
+ close (input_desc);
+ if (output_desc != STDOUT_FILE_NO)
+ close (output_desc);
+
+ /* Return child's process number. */
+ return pid;
+ }
+}
+
+int
+pwait (pid, status, flags)
+ int pid;
+ int *status;
+ int flags ATTRIBUTE_UNUSED;
+{
+ /* ??? Here's an opportunity to canonicalize the values in STATUS.
+ Needed? */
+ pid = waitpid (pid, status, 0);
+ return pid;
+}
===================================================================
Index: pex-win32.c
--- pex-win32.c 1 Jan 1970 00:00:00 -0000
+++ pex-win32.c 23 Jan 2003 18:37:34 -0000
@@ -0,0 +1,243 @@
+/* Utilities to execute a program in a subprocess (possibly linked by pipes
+ with other subprocesses), and wait for it. Generic Win32 specialization.
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
+ Free Software Foundation, Inc.
+
+This file is part of the libiberty library.
+Libiberty is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+Libiberty is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with libiberty; see the file COPYING.LIB. If not,
+write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#include "pex-common.h"
+
+#ifdef HAVE_STRING_H
+#include <string.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#ifdef HAVE_SYS_WAIT_H
+#include <sys/wait.h>
+#endif
+
+#include <process.h>
+#include <io.h>
+#include <fcntl.h>
+#include <signal.h>
+
+/* mingw32 headers may not define the following. */
+
+#ifndef _P_WAIT
+# define _P_WAIT 0
+# define _P_NOWAIT 1
+# define _P_OVERLAY 2
+# define _P_NOWAITO 3
+# define _P_DETACH 4
+
+# define WAIT_CHILD 0
+# define WAIT_GRANDCHILD 1
+#endif
+
+/* This is a kludge to get around the Microsoft C spawn functions' propensity
+ to remove the outermost set of double quotes from all arguments. */
+
+static const char * const *
+fix_argv (argvec)
+ char **argvec;
+{
+ int i;
+
+ for (i = 1; argvec[i] != 0; i++)
+ {
+ int len, j;
+ char *temp, *newtemp;
+
+ temp = argvec[i];
+ len = strlen (temp);
+ for (j = 0; j < len; j++)
+ {
+ if (temp[j] == '"')
+ {
+ newtemp = xmalloc (len + 2);
+ strncpy (newtemp, temp, j);
+ newtemp [j] = '\\';
+ strncpy (&newtemp [j+1], &temp [j], len-j);
+ newtemp [len+1] = 0;
+ temp = newtemp;
+ len++;
+ j++;
+ }
+ }
+
+ argvec[i] = temp;
+ }
+
+ for (i = 0; argvec[i] != 0; i++)
+ {
+ if (strpbrk (argvec[i], " \t"))
+ {
+ int len, trailing_backslash;
+ char *temp;
+
+ len = strlen (argvec[i]);
+ trailing_backslash = 0;
+
+ /* There is an added complication when an arg with embedded white
+ space ends in a backslash (such as in the case of -iprefix arg
+ passed to cpp). The resulting quoted strings gets misinterpreted
+ by the command interpreter -- it thinks that the ending quote
+ is escaped by the trailing backslash and things get confused.
+ We handle this case by escaping the trailing backslash, provided
+ it was not escaped in the first place. */
+ if (len > 1
+ && argvec[i][len-1] == '\\'
+ && argvec[i][len-2] != '\\')
+ {
+ trailing_backslash = 1;
+ ++len; /* to escape the final backslash. */
+ }
+
+ len += 2; /* and for the enclosing quotes. */
+
+ temp = xmalloc (len + 1);
+ temp[0] = '"';
+ strcpy (temp + 1, argvec[i]);
+ if (trailing_backslash)
+ temp[len-2] = '\\';
+ temp[len-1] = '"';
+ temp[len] = '\0';
+
+ argvec[i] = temp;
+ }
+ }
+
+ return (const char * const *) argvec;
+}
+
+/* Win32 supports pipes */
+int
+pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
+ const char *program;
+ char * const *argv;
+ const char *this_pname;
+ const char *temp_base;
+ char **errmsg_fmt, **errmsg_arg;
+ int flags;
+{
+ int pid;
+ int pdes[2], org_stdin, org_stdout;
+ int input_desc, output_desc;
+ int retries, sleep_interval;
+
+ /* Pipe waiting from last process, to be used as input for the next one.
+ Value is STDIN_FILE_NO if no pipe is waiting
+ (i.e. the next command is the first of a group). */
+ static int last_pipe_input;
+
+ /* If this is the first process, initialize. */
+ if (flags & PEXECUTE_FIRST)
+ last_pipe_input = STDIN_FILE_NO;
+
+ input_desc = last_pipe_input;
+
+ /* If this isn't the last process, make a pipe for its output,
+ and record it as waiting to be the input to the next process. */
+ if (! (flags & PEXECUTE_LAST))
+ {
+ if (_pipe (pdes, 256, O_BINARY) < 0)
+ {
+ *errmsg_fmt = "pipe";
+ *errmsg_arg = NULL;
+ return -1;
+ }
+ output_desc = pdes[WRITE_PORT];
+ last_pipe_input = pdes[READ_PORT];
+ }
+ else
+ {
+ /* Last process. */
+ output_desc = STDOUT_FILE_NO;
+ last_pipe_input = STDIN_FILE_NO;
+ }
+
+ if (input_desc != STDIN_FILE_NO)
+ {
+ org_stdin = dup (STDIN_FILE_NO);
+ dup2 (input_desc, STDIN_FILE_NO);
+ close (input_desc);
+ }
+
+ if (output_desc != STDOUT_FILE_NO)
+ {
+ org_stdout = dup (STDOUT_FILE_NO);
+ dup2 (output_desc, STDOUT_FILE_NO);
+ close (output_desc);
+ }
+
+ pid = (flags & PEXECUTE_SEARCH ? _spawnvp : _spawnv)
+ (_P_NOWAIT, program, fix_argv(argv));
+
+ if (input_desc != STDIN_FILE_NO)
+ {
+ dup2 (org_stdin, STDIN_FILE_NO);
+ close (org_stdin);
+ }
+
+ if (output_desc != STDOUT_FILE_NO)
+ {
+ dup2 (org_stdout, STDOUT_FILE_NO);
+ close (org_stdout);
+ }
+
+ if (pid == -1)
+ {
+ *errmsg_fmt = install_error_msg;
+ *errmsg_arg = program;
+ return -1;
+ }
+
+ return pid;
+}
+
+/* MS CRTDLL doesn't return enough information in status to decide if the
+ child exited due to a signal or not, rather it simply returns an
+ integer with the exit code of the child; eg., if the child exited with
+ an abort() call and didn't have a handler for SIGABRT, it simply returns
+ with status = 3. We fix the status code to conform to the usual WIF*
+ macros. Note that WIFSIGNALED will never be true under CRTDLL. */
+
+int
+pwait (pid, status, flags)
+ int pid;
+ int *status;
+ int flags;
+{
+ int termstat;
+
+ pid = _cwait (&termstat, pid, WAIT_CHILD);
+
+ /* ??? Here's an opportunity to canonicalize the values in STATUS.
+ Needed? */
+
+ /* cwait returns the child process exit code in termstat.
+ A value of 3 indicates that the child caught a signal, but not
+ which one. Since only SIGABRT, SIGFPE and SIGINT do anything, we
+ report SIGABRT. */
+ if (termstat == 3)
+ *status = SIGABRT;
+ else
+ *status = (((termstat) & 0xff) << 8);
+
+ return pid;
+}
===================================================================
Index: pexecute.c
--- pexecute.c 17 Oct 2001 21:15:41 -0000 1.23
+++ pexecute.c 1 Jan 1970 00:00:00 -0000
@@ -1,792 +0,0 @@
-/* Utilities to execute a program in a subprocess (possibly linked by pipes
- with other subprocesses), and wait for it.
- Copyright (C) 1996-2000 Free Software Foundation, Inc.
-
-This file is part of the libiberty library.
-Libiberty is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public
-License as published by the Free Software Foundation; either
-version 2 of the License, or (at your option) any later version.
-
-Libiberty is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with libiberty; see the file COPYING.LIB. If not,
-write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-/* This file exports two functions: pexecute and pwait. */
-
-/* This file lives in at least two places: libiberty and gcc.
- Don't change one without the other. */
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include <stdio.h>
-#include <errno.h>
-#ifdef NEED_DECLARATION_ERRNO
-extern int errno;
-#endif
-#ifdef HAVE_STRING_H
-#include <string.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_SYS_WAIT_H
-#include <sys/wait.h>
-#endif
-
-#include "libiberty.h"
-#include "safe-ctype.h"
-
-/* stdin file number. */
-#define STDIN_FILE_NO 0
-
-/* stdout file number. */
-#define STDOUT_FILE_NO 1
-
-/* value of `pipe': port index for reading. */
-#define READ_PORT 0
-
-/* value of `pipe': port index for writing. */
-#define WRITE_PORT 1
-
-static char *install_error_msg = "installation problem, cannot exec `%s'";
-
-/* pexecute: execute a program.
-
-@deftypefn Extension int pexecute (const char *@var{program}, char * const *@var{argv}, const char *@var{this_pname}, const char *@var{temp_base}, char **@var{errmsg_fmt}, char **@var{errmsg_arg}, int flags)
-
-Executes a program.
-
-@var{program} and @var{argv} are the arguments to
-@code{execv}/@code{execvp}.
-
-@var{this_pname} is name of the calling program (i.e., @code{argv[0]}).
-
-@var{temp_base} is the path name, sans suffix, of a temporary file to
-use if needed. This is currently only needed for MS-DOS ports that
-don't use @code{go32} (do any still exist?). Ports that don't need it
-can pass @code{NULL}.
-
-(@code{@var{flags} & PEXECUTE_SEARCH}) is non-zero if @env{PATH} should be searched
-(??? It's not clear that GCC passes this flag correctly). (@code{@var{flags} &
-PEXECUTE_FIRST}) is nonzero for the first process in chain.
-(@code{@var{flags} & PEXECUTE_FIRST}) is nonzero for the last process
-in chain. The first/last flags could be simplified to only mark the
-last of a chain of processes but that requires the caller to always
-mark the last one (and not give up early if some error occurs).
-It's more robust to require the caller to mark both ends of the chain.
-
-The result is the pid on systems like Unix where we
-@code{fork}/@code{exec} and on systems like WIN32 and OS/2 where we
-use @code{spawn}. It is up to the caller to wait for the child.
-
-The result is the @code{WEXITSTATUS} on systems like MS-DOS where we
-@code{spawn} and wait for the child here.
-
-Upon failure, @var{errmsg_fmt} and @var{errmsg_arg} are set to the
-text of the error message with an optional argument (if not needed,
-@var{errmsg_arg} is set to @code{NULL}), and @minus{}1 is returned.
-@code{errno} is available to the caller to use.
-
-@end deftypefn
-
-@deftypefn Extension int pwait (int @var{pid}, int *@var{status}, int @var{flags})
-
-Waits for a program started by @code{pexecute} to finish.
-
-@var{pid} is the process id of the task to wait for. @var{status} is
-the `status' argument to wait. @var{flags} is currently unused (allows
-future enhancement without breaking upward compatibility). Pass 0 for now.
-
-The result is the pid of the child reaped, or -1 for failure
-(@code{errno} says why).
-
-On systems that don't support waiting for a particular child, @var{pid} is
-ignored. On systems like MS-DOS that don't really multitask @code{pwait}
-is just a mechanism to provide a consistent interface for the caller.
-
-@end deftypefn
-
-@undocumented pfinish
-
- pfinish: finish generation of script
-
- pfinish is necessary for systems like MPW where a script is generated that
- runs the requested programs. */
-
-#ifdef __MSDOS__
-
-/* MSDOS doesn't multitask, but for the sake of a consistent interface
- the code behaves like it does. pexecute runs the program, tucks the
- exit code away, and returns a "pid". pwait must be called to fetch the
- exit code. */
-
-#include <process.h>
-
-/* For communicating information from pexecute to pwait. */
-static int last_pid = 0;
-static int last_status = 0;
-static int last_reaped = 0;
-
-int
-pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
- const char *program;
- char * const *argv;
- const char *this_pname;
- const char *temp_base;
- char **errmsg_fmt, **errmsg_arg;
- int flags;
-{
- int rc;
-
- last_pid++;
- if (last_pid < 0)
- last_pid = 1;
-
- if ((flags & PEXECUTE_ONE) != PEXECUTE_ONE)
- abort ();
-
-#ifdef __DJGPP__
- /* ??? What are the possible return values from spawnv? */
- rc = (flags & PEXECUTE_SEARCH ? spawnvp : spawnv) (P_WAIT, program, argv);
-#else
- char *scmd, *rf;
- FILE *argfile;
- int i, el = flags & PEXECUTE_SEARCH ? 4 : 0;
-
- if (temp_base == 0)
- temp_base = choose_temp_base ();
- scmd = (char *) xmalloc (strlen (program) + strlen (temp_base) + 6 + el);
- rf = scmd + strlen(program) + 2 + el;
- sprintf (scmd, "%s%s @%s.gp", program,
- (flags & PEXECUTE_SEARCH ? ".exe" : ""), temp_base);
- argfile = fopen (rf, "w");
- if (argfile == 0)
- {
- int errno_save = errno;
- free (scmd);
- errno = errno_save;
- *errmsg_fmt = "cannot open `%s.gp'";
- *errmsg_arg = temp_base;
- return -1;
- }
-
- for (i=1; argv[i]; i++)
- {
- char *cp;
- for (cp = argv[i]; *cp; cp++)
- {
- if (*cp == '"' || *cp == '\'' || *cp == '\\' || ISSPACE (*cp))
- fputc ('\\', argfile);
- fputc (*cp, argfile);
- }
- fputc ('\n', argfile);
- }
- fclose (argfile);
-
- rc = system (scmd);
-
- {
- int errno_save = errno;
- remove (rf);
- free (scmd);
- errno = errno_save;
- }
-#endif
-
- if (rc == -1)
- {
- *errmsg_fmt = install_error_msg;
- *errmsg_arg = (char *)program;
- return -1;
- }
-
- /* Tuck the status away for pwait, and return a "pid". */
- last_status = rc << 8;
- return last_pid;
-}
-
-/* Use ECHILD if available, otherwise use EINVAL. */
-#ifdef ECHILD
-#define PWAIT_ERROR ECHILD
-#else
-#define PWAIT_ERROR EINVAL
-#endif
-
-int
-pwait (pid, status, flags)
- int pid;
- int *status;
- int flags;
-{
- /* On MSDOS each pexecute must be followed by it's associated pwait. */
- if (pid != last_pid
- /* Called twice for the same child? */
- || pid == last_reaped)
- {
- errno = PWAIT_ERROR;
- return -1;
- }
- /* ??? Here's an opportunity to canonicalize the values in STATUS.
- Needed? */
-#ifdef __DJGPP__
- *status = (last_status >> 8);
-#else
- *status = last_status;
-#endif
- last_reaped = last_pid;
- return last_pid;
-}
-
-#endif /* MSDOS */
-
-#if defined (_WIN32) && ! defined (_UWIN)
-
-#include <process.h>
-
-#ifdef __CYGWIN__
-
-#define fix_argv(argvec) (argvec)
-
-extern int _spawnv ();
-extern int _spawnvp ();
-
-#else /* ! __CYGWIN__ */
-
-/* This is a kludge to get around the Microsoft C spawn functions' propensity
- to remove the outermost set of double quotes from all arguments. */
-
-static const char * const *
-fix_argv (argvec)
- char **argvec;
-{
- int i;
-
- for (i = 1; argvec[i] != 0; i++)
- {
- int len, j;
- char *temp, *newtemp;
-
- temp = argvec[i];
- len = strlen (temp);
- for (j = 0; j < len; j++)
- {
- if (temp[j] == '"')
- {
- newtemp = xmalloc (len + 2);
- strncpy (newtemp, temp, j);
- newtemp [j] = '\\';
- strncpy (&newtemp [j+1], &temp [j], len-j);
- newtemp [len+1] = 0;
- temp = newtemp;
- len++;
- j++;
- }
- }
-
- argvec[i] = temp;
- }
-
- for (i = 0; argvec[i] != 0; i++)
- {
- if (strpbrk (argvec[i], " \t"))
- {
- int len, trailing_backslash;
- char *temp;
-
- len = strlen (argvec[i]);
- trailing_backslash = 0;
-
- /* There is an added complication when an arg with embedded white
- space ends in a backslash (such as in the case of -iprefix arg
- passed to cpp). The resulting quoted strings gets misinterpreted
- by the command interpreter -- it thinks that the ending quote
- is escaped by the trailing backslash and things get confused.
- We handle this case by escaping the trailing backslash, provided
- it was not escaped in the first place. */
- if (len > 1
- && argvec[i][len-1] == '\\'
- && argvec[i][len-2] != '\\')
- {
- trailing_backslash = 1;
- ++len; /* to escape the final backslash. */
- }
-
- len += 2; /* and for the enclosing quotes. */
-
- temp = xmalloc (len + 1);
- temp[0] = '"';
- strcpy (temp + 1, argvec[i]);
- if (trailing_backslash)
- temp[len-2] = '\\';
- temp[len-1] = '"';
- temp[len] = '\0';
-
- argvec[i] = temp;
- }
- }
-
- return (const char * const *) argvec;
-}
-#endif /* __CYGWIN__ */
-
-#include <io.h>
-#include <fcntl.h>
-#include <signal.h>
-
-/* mingw32 headers may not define the following. */
-
-#ifndef _P_WAIT
-# define _P_WAIT 0
-# define _P_NOWAIT 1
-# define _P_OVERLAY 2
-# define _P_NOWAITO 3
-# define _P_DETACH 4
-
-# define WAIT_CHILD 0
-# define WAIT_GRANDCHILD 1
-#endif
-
-/* Win32 supports pipes */
-int
-pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
- const char *program;
- char * const *argv;
- const char *this_pname;
- const char *temp_base;
- char **errmsg_fmt, **errmsg_arg;
- int flags;
-{
- int pid;
- int pdes[2], org_stdin, org_stdout;
- int input_desc, output_desc;
- int retries, sleep_interval;
-
- /* Pipe waiting from last process, to be used as input for the next one.
- Value is STDIN_FILE_NO if no pipe is waiting
- (i.e. the next command is the first of a group). */
- static int last_pipe_input;
-
- /* If this is the first process, initialize. */
- if (flags & PEXECUTE_FIRST)
- last_pipe_input = STDIN_FILE_NO;
-
- input_desc = last_pipe_input;
-
- /* If this isn't the last process, make a pipe for its output,
- and record it as waiting to be the input to the next process. */
- if (! (flags & PEXECUTE_LAST))
- {
- if (_pipe (pdes, 256, O_BINARY) < 0)
- {
- *errmsg_fmt = "pipe";
- *errmsg_arg = NULL;
- return -1;
- }
- output_desc = pdes[WRITE_PORT];
- last_pipe_input = pdes[READ_PORT];
- }
- else
- {
- /* Last process. */
- output_desc = STDOUT_FILE_NO;
- last_pipe_input = STDIN_FILE_NO;
- }
-
- if (input_desc != STDIN_FILE_NO)
- {
- org_stdin = dup (STDIN_FILE_NO);
- dup2 (input_desc, STDIN_FILE_NO);
- close (input_desc);
- }
-
- if (output_desc != STDOUT_FILE_NO)
- {
- org_stdout = dup (STDOUT_FILE_NO);
- dup2 (output_desc, STDOUT_FILE_NO);
- close (output_desc);
- }
-
- pid = (flags & PEXECUTE_SEARCH ? _spawnvp : _spawnv)
- (_P_NOWAIT, program, fix_argv(argv));
-
- if (input_desc != STDIN_FILE_NO)
- {
- dup2 (org_stdin, STDIN_FILE_NO);
- close (org_stdin);
- }
-
- if (output_desc != STDOUT_FILE_NO)
- {
- dup2 (org_stdout, STDOUT_FILE_NO);
- close (org_stdout);
- }
-
- if (pid == -1)
- {
- *errmsg_fmt = install_error_msg;
- *errmsg_arg = program;
- return -1;
- }
-
- return pid;
-}
-
-/* MS CRTDLL doesn't return enough information in status to decide if the
- child exited due to a signal or not, rather it simply returns an
- integer with the exit code of the child; eg., if the child exited with
- an abort() call and didn't have a handler for SIGABRT, it simply returns
- with status = 3. We fix the status code to conform to the usual WIF*
- macros. Note that WIFSIGNALED will never be true under CRTDLL. */
-
-int
-pwait (pid, status, flags)
- int pid;
- int *status;
- int flags;
-{
-#ifdef __CYGWIN__
- return wait (status);
-#else
- int termstat;
-
- pid = _cwait (&termstat, pid, WAIT_CHILD);
-
- /* ??? Here's an opportunity to canonicalize the values in STATUS.
- Needed? */
-
- /* cwait returns the child process exit code in termstat.
- A value of 3 indicates that the child caught a signal, but not
- which one. Since only SIGABRT, SIGFPE and SIGINT do anything, we
- report SIGABRT. */
- if (termstat == 3)
- *status = SIGABRT;
- else
- *status = (((termstat) & 0xff) << 8);
-
- return pid;
-#endif /* __CYGWIN__ */
-}
-
-#endif /* _WIN32 && ! _UWIN */
-
-#ifdef OS2
-
-/* ??? Does OS2 have process.h? */
-extern int spawnv ();
-extern int spawnvp ();
-
-int
-pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
- const char *program;
- char * const *argv;
- const char *this_pname;
- const char *temp_base;
- char **errmsg_fmt, **errmsg_arg;
- int flags;
-{
- int pid;
-
- if ((flags & PEXECUTE_ONE) != PEXECUTE_ONE)
- abort ();
- /* ??? Presumably 1 == _P_NOWAIT. */
- pid = (flags & PEXECUTE_SEARCH ? spawnvp : spawnv) (1, program, argv);
- if (pid == -1)
- {
- *errmsg_fmt = install_error_msg;
- *errmsg_arg = program;
- return -1;
- }
- return pid;
-}
-
-int
-pwait (pid, status, flags)
- int pid;
- int *status;
- int flags;
-{
- /* ??? Here's an opportunity to canonicalize the values in STATUS.
- Needed? */
- int pid = wait (status);
- return pid;
-}
-
-#endif /* OS2 */
-
-#ifdef MPW
-
-/* MPW pexecute doesn't actually run anything; instead, it writes out
- script commands that, when run, will do the actual executing.
-
- For example, in GCC's case, GCC will write out several script commands:
-
- cpp ...
- cc1 ...
- as ...
- ld ...
-
- and then exit. None of the above programs will have run yet. The task
- that called GCC will then execute the script and cause cpp,etc. to run.
- The caller must invoke pfinish before calling exit. This adds
- the finishing touches to the generated script. */
-
-static int first_time = 1;
-
-int
-pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
- const char *program;
- char * const *argv;
- const char *this_pname;
- const char *temp_base;
- char **errmsg_fmt, **errmsg_arg;
- int flags;
-{
- char tmpprogram[255];
- char *cp, *tmpname;
- int i;
-
- mpwify_filename (program, tmpprogram);
- if (first_time)
- {
- printf ("Set Failed 0\n");
- first_time = 0;
- }
-
- fputs ("If {Failed} == 0\n", stdout);
- /* If being verbose, output a copy of the command. It should be
- accurate enough and escaped enough to be "clickable". */
- if (flags & PEXECUTE_VERBOSE)
- {
- fputs ("\tEcho ", stdout);
- fputc ('\'', stdout);
- fputs (tmpprogram, stdout);
- fputc ('\'', stdout);
- fputc (' ', stdout);
- for (i=1; argv[i]; i++)
- {
- fputc ('\'', stdout);
- /* See if we have an argument that needs fixing. */
- if (strchr(argv[i], '/'))
- {
- tmpname = (char *) xmalloc (256);
- mpwify_filename (argv[i], tmpname);
- argv[i] = tmpname;
- }
- for (cp = argv[i]; *cp; cp++)
- {
- /* Write an Option-d escape char in front of special chars. */
- if (strchr("'+", *cp))
- fputc ('\266', stdout);
- fputc (*cp, stdout);
- }
- fputc ('\'', stdout);
- fputc (' ', stdout);
- }
- fputs ("\n", stdout);
- }
- fputs ("\t", stdout);
- fputs (tmpprogram, stdout);
- fputc (' ', stdout);
-
- for (i=1; argv[i]; i++)
- {
- /* See if we have an argument that needs fixing. */
- if (strchr(argv[i], '/'))
- {
- tmpname = (char *) xmalloc (256);
- mpwify_filename (argv[i], tmpname);
- argv[i] = tmpname;
- }
- if (strchr (argv[i], ' '))
- fputc ('\'', stdout);
- for (cp = argv[i]; *cp; cp++)
- {
- /* Write an Option-d escape char in front of special chars. */
- if (strchr("'+", *cp))
- fputc ('\266', stdout);
- fputc (*cp, stdout);
- }
- if (strchr (argv[i], ' '))
- fputc ('\'', stdout);
- fputc (' ', stdout);
- }
-
- fputs ("\n", stdout);
-
- /* Output commands that arrange to clean up and exit if a failure occurs.
- We have to be careful to collect the status from the program that was
- run, rather than some other script command. Also, we don't exit
- immediately, since necessary cleanups are at the end of the script. */
- fputs ("\tSet TmpStatus {Status}\n", stdout);
- fputs ("\tIf {TmpStatus} != 0\n", stdout);
- fputs ("\t\tSet Failed {TmpStatus}\n", stdout);
- fputs ("\tEnd\n", stdout);
- fputs ("End\n", stdout);
-
- /* We're just composing a script, can't fail here. */
- return 0;
-}
-
-int
-pwait (pid, status, flags)
- int pid;
- int *status;
- int flags;
-{
- *status = 0;
- return 0;
-}
-
-/* Write out commands that will exit with the correct error code
- if something in the script failed. */
-
-void
-pfinish ()
-{
- printf ("\tExit \"{Failed}\"\n");
-}
-
-#endif /* MPW */
-
-/* include for Unix-like environments but not for Dos-like environments */
-#if ! defined (__MSDOS__) && ! defined (OS2) && ! defined (MPW) \
- && ! (defined (_WIN32) && ! defined (_UWIN))
-
-extern int execv ();
-extern int execvp ();
-
-int
-pexecute (program, argv, this_pname, temp_base, errmsg_fmt, errmsg_arg, flags)
- const char *program;
- char * const *argv;
- const char *this_pname;
- const char *temp_base ATTRIBUTE_UNUSED;
- char **errmsg_fmt, **errmsg_arg;
- int flags;
-{
- int (*func)() = (flags & PEXECUTE_SEARCH ? execvp : execv);
- int pid;
- int pdes[2];
- int input_desc, output_desc;
- int retries, sleep_interval;
- /* Pipe waiting from last process, to be used as input for the next one.
- Value is STDIN_FILE_NO if no pipe is waiting
- (i.e. the next command is the first of a group). */
- static int last_pipe_input;
-
- /* If this is the first process, initialize. */
- if (flags & PEXECUTE_FIRST)
- last_pipe_input = STDIN_FILE_NO;
-
- input_desc = last_pipe_input;
-
- /* If this isn't the last process, make a pipe for its output,
- and record it as waiting to be the input to the next process. */
- if (! (flags & PEXECUTE_LAST))
- {
- if (pipe (pdes) < 0)
- {
- *errmsg_fmt = "pipe";
- *errmsg_arg = NULL;
- return -1;
- }
- output_desc = pdes[WRITE_PORT];
- last_pipe_input = pdes[READ_PORT];
- }
- else
- {
- /* Last process. */
- output_desc = STDOUT_FILE_NO;
- last_pipe_input = STDIN_FILE_NO;
- }
-
- /* Fork a subprocess; wait and retry if it fails. */
- sleep_interval = 1;
- pid = -1;
- for (retries = 0; retries < 4; retries++)
- {
- pid = fork ();
- if (pid >= 0)
- break;
- sleep (sleep_interval);
- sleep_interval *= 2;
- }
-
- switch (pid)
- {
- case -1:
- *errmsg_fmt = "fork";
- *errmsg_arg = NULL;
- return -1;
-
- case 0: /* child */
- /* Move the input and output pipes into place, if necessary. */
- if (input_desc != STDIN_FILE_NO)
- {
- close (STDIN_FILE_NO);
- dup (input_desc);
- close (input_desc);
- }
- if (output_desc != STDOUT_FILE_NO)
- {
- close (STDOUT_FILE_NO);
- dup (output_desc);
- close (output_desc);
- }
-
- /* Close the parent's descs that aren't wanted here. */
- if (last_pipe_input != STDIN_FILE_NO)
- close (last_pipe_input);
-
- /* Exec the program. */
- (*func) (program, argv);
-
- fprintf (stderr, "%s: ", this_pname);
- fprintf (stderr, install_error_msg, program);
- fprintf (stderr, ": %s\n", xstrerror (errno));
- exit (-1);
- /* NOTREACHED */
- return 0;
-
- default:
- /* In the parent, after forking.
- Close the descriptors that we made for this child. */
- if (input_desc != STDIN_FILE_NO)
- close (input_desc);
- if (output_desc != STDOUT_FILE_NO)
- close (output_desc);
-
- /* Return child's process number. */
- return pid;
- }
-}
-
-int
-pwait (pid, status, flags)
- int pid;
- int *status;
- int flags ATTRIBUTE_UNUSED;
-{
- /* ??? Here's an opportunity to canonicalize the values in STATUS.
- Needed? */
-#ifdef VMS
- pid = waitpid (-1, status, 0);
-#else
- pid = wait (status);
-#endif
- return pid;
-}
-
-#endif /* ! __MSDOS__ && ! OS2 && ! MPW && ! (_WIN32 && ! _UWIN) */