This is the mail archive of the binutils@sourceware.org mailing list for the binutils project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: make install-strip with binutils


[ adding gcc-patches, gdb-patches ]

* NightStrike wrote on Wed, Oct 27, 2010 at 11:08:51PM CEST:
> http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46202

Tested GCC in non-cross setup on i686-pc-linux-gnu, also tested
binutils+gdb as well as combined tree (to ensure in-tree strip is
used).  I'm fairly certain the cross setup should work as well, as the
toplevel should be using STRIP_FOR_TARGET correctly, but if somebody
could test that for me that would be nice.  Tested 'make info pdf html'
for the docs.  There is also a patch for wwwdocs.

For the moment, the non-libtool libraries are not stripped, while
libtool will --strip-debug its static libraries and --strip-unneeded its
shared libraries if 'strip' is GNU.  I don't plan to work on the
non-libtool libraries.

OK to commit to GCC and sync to src?  The patch has src-specific bits in
etc/.  install-strip will fail for parts of the src tree outside of
binutils+gdb, but fixing that should be straight-forward.

I'll gladly split the .PHONY fixlets and the minor gcc/doc cleanups in
separate patches if you prefer.

If somebody knows the autogen machinery well enough for the lisp part of
Makefile.tpl to generate the install-strip-* dependencies from the
non-strip ones (rather than duplicating them manually in Makefile.def),
I'd appreciate a hint.  The duplication is not too bad yet though.

Startup files $libdir/gcc/$target/$version/$MULTISUBDIR/crt*.o are not
stripped.  The only other files reported as 'not stripped' by the 'file'
program are the $libdir/libgcj_bc.so.1.0.0 ones, and IIUC they are
almost-empty stub libraries where 'file' detection is off.

Note that I found a minor bug in the automake-generated install-strip
rule that causes a failure when you override STRIP with more than word,
e.g., STRIP='strip --verbose';
<http://thread.gmane.org/gmane.comp.sysutils.automake.patches/4890>

Thanks,
Ralf

bits only for src:

etc/ChangeLog:
2010-11-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* Makefile.in (install-strip): New target.

diff --git a/etc/Makefile.in b/etc/Makefile.in
index e910ad4..0d19c13 100644
--- a/etc/Makefile.in
+++ b/etc/Makefile.in
@@ -64,7 +64,7 @@ PDFFILES = standards.pdf configure.pdf
 HTMLFILES = standards.html configure.html
 
 all: info
-install: install-info
+install install-strip: install-info
 
 uninstall:
 


gcc www update:

--- htdocs/gcc-4.6/changes.html	2 Nov 2010 04:54:56 -0000	1.54
+++ htdocs/gcc-4.6/changes.html	2 Nov 2010 20:05:56 -0000
@@ -351,5 +351,15 @@
 
 <h2>Other significant improvements</h2>
 
+<h3>Installation changes</h3>
+
+  <ul>
+    <li>
+    An <code>install-strip</code> <code>make</code> target is provided
+    that installs stripped executables, and may install libraries with
+    unneeded or debugging sections stripped.
+    </li>
+  </ul>
+
 </body>
 </html>



bits for GCC and shared GCC/src bits:

PR other/46202: implement install-strip.

ChangeLog:
2010-11-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	PR other/46202
	* configure.ac: Fix just-built in-tree STRIP name to be
	binutils/strip-new.
	* configure: Regenerate.
	* Makefile.def (install-strip-gcc, install-strip-binutils)
	(install-strip-opcodes, install-strip-ld, install-strip-itcl)
	(install-strip-sid): Mirror dependencies on non-strip variants
	of these targets on the respective -strip prerequisites.
	* Makefile.tpl (install-strip, install-strip-host)
	(install-strip-target): New targets.
	(install-strip-[+module+], install-strip-target-[+module+]):
	New targets.
	* Makefile.in: Regenerate.

gcc/ChangeLog:
2010-11-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	PR other/46202
	* Makefile.in (install_sh, INSTALL_STRIP_PROGRAM): New
	variables.
	(AR_FOR_TARGET, RANLIB_FOR_TARGET, STRIP_FOR_TARGET): Fix
	shell quoting.
	(STRIP_FOR_TARGET): Look for in-tree strip under name strip-new.
	(install-strip): New target.
	* doc/install.texi (Final install): Minor markup and code style
	fixes.  Document install-strip target.

fixincludes/ChangeLog:
2010-11-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	PR other/46202
	* Makefile.in (install-strip): New phony target.
	(all, check, install): Also mark as phony.

libgcc/ChangeLog:
2010-11-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	PR other/46202
	* Makefile.in (install-strip): New phony target.

libiberty/ChangeLog:
2010-11-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	PR other/46202
	* Makefile.in (install-strip): New phony target.
	(install): Also mark as phony.

gnattools/ChangeLog:
2010-11-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	PR other/46202
	* Makefile.in (install-strip): New phony target.
	(check, installcheck, info, dvi, pdf, html, install)
	(install-info, install-pdf, install-html, mostlyclean)
	(clean, distclean, maintainer-clean): Mark phony.

libada/ChangeLog:
2010-11-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	PR other/46202
	* Makefile.in (install-strip): New phony target.
	(check, installcheck, info, dvi, pdf, html, install)
	(install-info, install-pdf, install-html, mostlyclean)
	(clean, distclean, maintainer-clean): Mark phony.

diff --git a/Makefile.def b/Makefile.def
index 6223bf3..279261f 100644
--- a/Makefile.def
+++ b/Makefile.def
@@ -346,6 +346,7 @@ dependencies = { module=dvi-gcc; on=all-build-libiberty; };
 dependencies = { module=pdf-gcc; on=all-build-libiberty; };
 dependencies = { module=html-gcc; on=all-build-libiberty; };
 dependencies = { module=install-gcc ; on=install-fixincludes; };
+dependencies = { module=install-strip-gcc ; on=install-strip-fixincludes; };
 
 dependencies = { module=configure-libcpp; on=configure-libiberty; hard=true; };
 dependencies = { module=configure-libcpp; on=configure-intl; };
@@ -407,9 +408,11 @@ dependencies = { module=all-binutils; on=all-intl; };
 // binutils might be on PATH, and they might need the shared opcodes
 // library.
 dependencies = { module=install-binutils; on=install-opcodes; };
+dependencies = { module=install-strip-binutils; on=install-strip-opcodes; };
 
 // libopcodes depends on libbfd
 dependencies = { module=install-opcodes; on=install-bfd; };
+dependencies = { module=install-strip-opcodes; on=install-strip-bfd; };
 
 dependencies = { module=configure-gas; on=configure-intl; };
 dependencies = { module=all-gas; on=all-libiberty; };
@@ -430,6 +433,7 @@ dependencies = { module=all-ld; on=all-build-byacc; };
 dependencies = { module=all-ld; on=all-build-flex; };
 dependencies = { module=all-ld; on=all-intl; };
 dependencies = { module=install-ld; on=install-gold; };
+dependencies = { module=install-strip-ld; on=install-strip-gold; };
 dependencies = { module=configure-gold; on=configure-intl; };
 dependencies = { module=all-gold; on=all-libiberty; };
 dependencies = { module=all-gold; on=all-intl; };
@@ -460,6 +464,7 @@ dependencies = { module=configure-itcl; on=configure-tk; };
 dependencies = { module=all-itcl; on=all-tcl; };
 dependencies = { module=all-itcl; on=all-tk; };
 dependencies = { module=install-itcl; on=install-tcl; };
+dependencies = { module=install-strip-itcl; on=install-strip-tcl; };
 
 dependencies = { module=configure-tk; on=configure-tcl; };
 dependencies = { module=all-tk; on=all-tcl; };
@@ -470,7 +475,9 @@ dependencies = { module=all-sid; on=all-opcodes; };
 dependencies = { module=all-sid; on=all-tcl; };
 dependencies = { module=all-sid; on=all-tk; };
 dependencies = { module=install-sid; on=install-tcl; };
+dependencies = { module=install-strip-sid; on=install-strip-tcl; };
 dependencies = { module=install-sid; on=install-tk; };
+dependencies = { module=install-strip-sid; on=install-strip-tk; };
 
 dependencies = { module=configure-sim; on=configure-intl; };
 dependencies = { module=all-sim; on=all-intl; };
diff --git a/Makefile.tpl b/Makefile.tpl
index 4c55ee2..cc1d2ac 100644
--- a/Makefile.tpl
+++ b/Makefile.tpl
@@ -878,6 +878,26 @@ install.all: install-no-fixedincludes
 install-no-fixedincludes: installdirs install-host-nogcc \
 	install-target gcc-no-fixedincludes
 
+.PHONY: install-strip
+install-strip:
+	@: $(MAKE); $(unstage)
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(MAKE) $(RECURSE_FLAGS_TO_PASS) installdirs install-strip-host install-strip-target
+
+.PHONY: install-strip-host
+install-strip-host: [+
+  FOR host_modules +] \
+    maybe-install-strip-[+module+][+
+  ENDFOR host_modules +]
+
+.PHONY: install-strip-target
+install-strip-target: [+
+  FOR target_modules +] \
+    maybe-install-strip-target-[+module+][+
+  ENDFOR target_modules +]
+
+
 ### other supporting targets
 
 MAKEDIRS= \
@@ -1163,6 +1183,23 @@ install-[+module+]: installdirs
 [+ ENDIF no_install +]
 @endif [+module+]
 
+.PHONY: install-strip-[+module+] maybe-install-strip-[+module+]
+maybe-install-strip-[+module+]:
+@if [+module+]
+maybe-install-strip-[+module+]: install-strip-[+module+]
+[+ IF no_install +]
+install-strip-[+module+]:
+[+ ELSE install +]
+install-strip-[+module+]: installdirs
+	@: $(MAKE); $(unstage)
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+	$(HOST_EXPORTS) \
+	(cd $(HOST_SUBDIR)/[+module+] && \
+	  $(MAKE) $(FLAGS_TO_PASS) [+extra_make_flags+] install-strip)
+[+ ENDIF no_install +]
+@endif [+module+]
+
 # Other targets (info, dvi, pdf, etc.)
 [+ FOR recursive_targets +]
 .PHONY: maybe-[+make_target+]-[+module+] [+make_target+]-[+module+]
@@ -1275,6 +1312,28 @@ ENDIF raw_cxx +]
 [+ ENDIF no_install +]
 @endif target-[+module+]
 
+.PHONY: install-strip-target-[+module+] maybe-install-strip-target-[+module+]
+maybe-install-strip-target-[+module+]:
+@if target-[+module+]
+maybe-install-strip-target-[+module+]: install-strip-target-[+module+]
+[+ IF no_install +]
+# Dummy target for uninstallable.
+install-strip-target-[+module+]:
+[+ ELSE install +]
+install-strip-target-[+module+]: installdirs
+	@: $(MAKE); $(unstage)
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
+IF raw_cxx +]
+	$(RAW_CXX_TARGET_EXPORTS) \[+
+ELSE normal_cxx +]
+	$(NORMAL_TARGET_EXPORTS) \[+
+ENDIF raw_cxx +]
+	(cd $(TARGET_SUBDIR)/[+module+] && \
+	  $(MAKE) $(TARGET_FLAGS_TO_PASS) [+extra_make_flags+] install-strip)
+[+ ENDIF no_install +]
+@endif target-[+module+]
+
 # Other targets (info, dvi, pdf, etc.)
 [+ FOR recursive_targets +]
 .PHONY: maybe-[+make_target+]-target-[+module+] [+make_target+]-target-[+module+]
diff --git a/configure.ac b/configure.ac
index ac44863..a7ec467 100644
--- a/configure.ac
+++ b/configure.ac
@@ -3343,7 +3343,7 @@ GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
 GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
 GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
 GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
-GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip])
+GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new])
 GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres])
 GCC_TARGET_TOOL(windmc, WINDMC_FOR_TARGET, WINDMC, [binutils/windmc])
 
diff --git a/fixincludes/Makefile.in b/fixincludes/Makefile.in
index f91a70d..e335997 100644
--- a/fixincludes/Makefile.in
+++ b/fixincludes/Makefile.in
@@ -188,6 +188,11 @@ install : all
 	  $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@
 	$(INSTALL_SCRIPT) mkheaders $(DESTDIR)$(itoolsdir)/mkheaders
 
+install-strip: install
+	test -z '$(STRIP)' \
+	  || $(STRIP) $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@
+
+.PHONY: all check install install-strip
 .PHONY: dvi pdf info html install-pdf install-info install-html
 
 dvi :
diff --git a/gcc/Makefile.in b/gcc/Makefile.in
index a3493cf..aa03220 100644
--- a/gcc/Makefile.in
+++ b/gcc/Makefile.in
@@ -22,7 +22,7 @@
 #<http://www.gnu.org/licenses/>.
 
 # The targets for external use include:
-# all, doc, install, install-cross, install-cross-rest,
+# all, doc, install, install-cross, install-cross-rest, install-strip,
 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean.
 
 # This is the default target.
@@ -255,6 +255,8 @@ LN_S=@LN_S@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL@
+install_sh = $(SHELL) $(srcdir)/../install-sh
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
 MAKEINFO = @MAKEINFO@
 MAKEINFOFLAGS = --no-split
 TEXI2DVI = texi2dvi
@@ -395,7 +397,7 @@ AR_FOR_TARGET := $(shell \
     if [ "$(host)" = "$(target)" ] ; then \
       echo $(AR); \
     else \
-       t='$(program_transform_name)'; echo ar | sed -e $$t ; \
+       t='$(program_transform_name)'; echo ar | sed -e "$$t" ; \
     fi; \
   fi)
 AR_FLAGS_FOR_TARGET =
@@ -410,20 +412,20 @@ RANLIB_FOR_TARGET := $(shell \
     if [ "$(host)" = "$(target)" ] ; then \
       echo $(RANLIB); \
     else \
-       t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
+       t='$(program_transform_name)'; echo ranlib | sed -e "$$t" ; \
     fi; \
   fi)
 ORIGINAL_LD_FOR_TARGET = @ORIGINAL_LD_FOR_TARGET@
 ORIGINAL_NM_FOR_TARGET = @ORIGINAL_NM_FOR_TARGET@
 NM_FOR_TARGET = ./nm
 STRIP_FOR_TARGET := $(shell \
-  if [ -f $(objdir)/../binutils/strip ] ; then \
-    echo $(objdir)/../binutils/strip ; \
+  if [ -f $(objdir)/../binutils/strip-new ] ; then \
+    echo $(objdir)/../binutils/strip-new ; \
   else \
     if [ "$(host)" = "$(target)" ] ; then \
       echo strip; \
     else \
-       t='$(program_transform_name)'; echo strip | sed -e $$t ; \
+       t='$(program_transform_name)'; echo strip | sed -e "$$t" ; \
     fi; \
   fi)
 
@@ -4464,7 +4466,7 @@ maintainer-clean:
 	-rm -f gcc.??s gcc.*aux
 	-rm -f $(gcc_docdir)/*.info $(gcc_docdir)/*.1 $(gcc_docdir)/*.7 $(gcc_docdir)/*.dvi $(gcc_docdir)/*.pdf
 #
-# Entry points `install' and `uninstall'.
+# Entry points `install', `install-strip', and `uninstall'.
 # Also use `install-collect2' to install collect2 when the config files don't.
 
 # Copy the compiler files into directories where they will be run.
@@ -4478,6 +4480,12 @@ ifeq ($(enable_plugin),yes)
 install: install-plugin
 endif
 
+install-strip: override INSTALL_PROGRAM = $(INSTALL_STRIP_PROGRAM)
+ifneq ($(STRIP),)
+install-strip: export STRIPPROG = $(STRIP)
+endif
+install-strip: install
+
 # Handle cpp installation.
 install-cpp: installdirs cpp$(exeext)
 	-rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext)
diff --git a/gcc/config/i386/t-cygming b/gcc/config/i386/t-cygming
index 183e545..6395ff9 100644
--- a/gcc/config/i386/t-cygming
+++ b/gcc/config/i386/t-cygming
@@ -92,7 +92,7 @@ SHLIB_LINK = $(LN_S) -f $(SHLIB_MAP) $(SHLIB_MAP).def && \
 # libgcc.mk.  We want this delayed until actual install time.
 SHLIB_INSTALL = \
 	$$(mkinstalldirs) $$(DESTDIR)$$(slibdir)$(SHLIB_SLIBDIR_QUAL); \
-	$(INSTALL_PROGRAM) $(SHLIB_DIR)/$(SHLIB_SONAME) \
+	$(INSTALL) $(SHLIB_DIR)/$(SHLIB_SONAME) \
 	  $$(DESTDIR)$$(bindir)/$(SHLIB_SONAME); \
 	$(INSTALL_DATA) $(SHLIB_DIR)/$(SHLIB_IMPLIB) \
 	  $$(DESTDIR)$$(slibdir)$(SHLIB_SLIBDIR_QUAL)/$(SHLIB_IMPLIB)
diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index 877ae5f..98b3d38 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -2638,7 +2638,7 @@ messages may be automatically processed.
 
 Now that GCC has been built (and optionally tested), you can install it with
 @smallexample
-cd @var{objdir}; make install
+cd @var{objdir} && make install
 @end smallexample
 
 We strongly recommend to install into a target directory where there is
@@ -2674,7 +2674,8 @@ jail can be achieved with the command
 make DESTDIR=@var{path-to-rootdir} install
 @end smallexample
 
-@noindent where @var{path-to-rootdir} is the absolute path of
+@noindent
+where @var{path-to-rootdir} is the absolute path of
 a directory relative to which all installation paths will be
 interpreted.  Note that the directory specified by @code{DESTDIR}
 need not exist yet; it will be created if necessary.
@@ -2688,6 +2689,12 @@ it will not be created otherwise.  This is regarded as a feature,
 not as a bug, because it gives slightly more control to the packagers
 using the @code{DESTDIR} feature.
 
+You can let installed programs and libraries be stripped with
+
+@smallexample
+make install-strip
+@end smallexample
+
 If you are bootstrapping a released version of GCC then please
 quickly review the build status page for your release, available from
 @uref{http://gcc.gnu.org/buildstat.html}.
diff --git a/gnattools/Makefile.in b/gnattools/Makefile.in
index 9319896..3718b30 100644
--- a/gnattools/Makefile.in
+++ b/gnattools/Makefile.in
@@ -1,5 +1,5 @@
 # Makefile for gnattools
-#   Copyright 2003, 2004, 2009 Free Software Foundation, Inc.
+#   Copyright 2003, 2004, 2009, 2010 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -274,18 +274,24 @@ pdf:
 # Build HTML (none here).
 html:
 
+.PHONY: check installcheck info dvi pdf html
+
 # Build TAGS (none here).
 TAGS:
 
 # Installation rules.
 install:
 
+install-strip: install
+
 install-info:
 
 install-pdf:
 
 install-html:
 
+.PHONY: install install-strip install-info install-pdf install-html
+
 # Cleaning rules.
 mostlyclean:
 
@@ -296,6 +302,8 @@ distclean:
 
 maintainer-clean:
 
+.PHONY: mostlyclean clean distclean maintainer-clean
+
 # Rules for rebuilding this Makefile.
 Makefile: $(srcdir)/Makefile.in config.status
 	CONFIG_FILES=$@ ; \
diff --git a/libada/Makefile.in b/libada/Makefile.in
index 01fa836..cd51823 100644
--- a/libada/Makefile.in
+++ b/libada/Makefile.in
@@ -1,5 +1,5 @@
 # Makefile for libada.
-#   Copyright 2003, 2004, 2009 Free Software Foundation, Inc.
+#   Copyright 2003, 2004, 2009, 2010 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -19,7 +19,7 @@
 all: gnatlib
 	$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
 
-.PHONY: all install
+.PHONY: all
 
 ## Multilib support variables.
 MULTISRCTOP =
@@ -144,16 +144,22 @@ html:
 # Build TAGS (none here).
 TAGS:
 
+.PHONY: check installcheck info dvi pdf html
+
 # Installation rules.
 install: install-gnatlib
 	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
 
+install-strip: install
+
 install-info:
 
 install-pdf:
 
 install-html:
 
+.PHONY: install install-strip install-info install-pdf install-html
+
 # Cleaning rules.
 mostlyclean:
 	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
@@ -167,6 +173,8 @@ distclean:
 
 maintainer-clean:
 
+.PHONY: mostlyclean clean distclean maintainer-clean
+
 # Rules for rebuilding this Makefile.
 Makefile: $(srcdir)/Makefile.in config.status
 	CONFIG_FILES=$@ ; \
diff --git a/libgcc/Makefile.in b/libgcc/Makefile.in
index 631af5a..dc4838f 100644
--- a/libgcc/Makefile.in
+++ b/libgcc/Makefile.in
@@ -1,6 +1,6 @@
 # Makefile.in
 
-# Copyright (C) 2005, 2006, 2009 Free Software Foundation
+# Copyright (C) 2005, 2006, 2009, 2010 Free Software Foundation
 #
 # This file is part of GCC.
 #
@@ -975,7 +975,9 @@ install-leaf: $(install-shared) $(install-libunwind)
 install: install-leaf
 	@: $(MAKE) ; $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
 
-.PHONY: install install-shared install-libunwind
+install-strip: install
+
+.PHONY: install install-shared install-libunwind install-strip
 
 # Don't export variables to the environment, in order to not confuse
 # configure.
diff --git a/libiberty/Makefile.in b/libiberty/Makefile.in
index 1893254..f928b5e 100644
--- a/libiberty/Makefile.in
+++ b/libiberty/Makefile.in
@@ -335,6 +335,9 @@ libiberty.html : $(srcdir)/libiberty.texi $(TEXISRC)
 
 INSTALL_DEST = @INSTALL_DEST@
 install: install_to_$(INSTALL_DEST) install-subdir
+install-strip: install
+
+.PHONY: install install-strip
 
 # This is tricky.  Even though CC in the Makefile contains
 # multilib-specific flags, it's overridden by FLAGS_TO_PASS from the


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]