This is the mail archive of the crossgcc@cygnus.com mailing list for the crossgcc project.

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Re: gdb with wiggler

gdb supports the wiggler only under Win32, since it needs the Macraigor DLL
to work.  Under Linux, the stock version of gdb does not have the necessary
driver.  You can get a driver and gdb patch for 683xx devices from
ftp://ftp.lpr.e-technik.tu-muenchen.de/pub/bdm/ , however I'm not aware of
any Power PC support under Linux at this time.

Brendan Simon wrote:

> People have told me that GDB works with the wiggler BDM hardware.  If I
> do "help target" it confirms that the "ocd" option supports the
> Wiggler.  I get a segmentation fault (on Linux) if I try "set target
> wiggler /dev/lp0".
>
> Is the wiggler supported with Linux or Win32 only ??
> Has anyone using GDB with Linux and the Wiggler ??
>
> Thanks, Brendan Simon.
>
> ________________________________________________
> To get help for the crossgcc list, send mail to
> crossgcc-request@cygnus.com with the text 'help'
> (without the quotes) in the body of the message.

________________________________________________
To get help for the crossgcc list, send mail to
crossgcc-request@cygnus.com with the text 'help'
(without the quotes) in the body of the message.