This is the mail archive of the crossgcc@sources.redhat.com mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
Dear Carl: Thanks, I will try the newer versions as you suggest. I used such old versions of binutils and gcc because the combination was recommended by Karim Yaghmour in his book "Building Embedded Linux Systems". I think this combination must have been test on glibc and Linux, but probably not tested on uClibc and uClinux. ======= 2004-07-30 02:23:42 in your letter======= >On Thu, Jul 29, 2004 at 09:23:25PM +0800, ?????? wrote: >> I am compliling cross tool chain for ARM7TDMI, I choose binutils-2.10.1, gcc-2.95.3 and uClibc-0.9.26, the Linux kernel I use is Linux-2.4.20 and I patched with uClinux patch for this kernel. > >Any particular reason you need to use such old versions of gcc and >binutils? Newer versions, such as gcc-3.3.3 and binutils-2.14 or >2.14.90.0.5 are better supported. You might try using them instead. > > > -----Carl > = = = = = = = = = = = = = = = = = = = = Best Regards! Zhu Pengfei zhupf@cgdp.nju.edu.cn 2004-07-30 ------ Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/ Want to unsubscribe? Send a note to crossgcc-unsubscribe@sources.redhat.com
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |