This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
Hi folks, I'm trying to remote test the following toolchain: -> gcc-2.95.3 (where i incorpored testsuite from gcc-2.95-2.1 iirc because no testsuite files from tag release at gnu svn found), -> binutils-2.9.1, -> gdb-4.18 -> and newlib-1.12.0 I know im dealing with very older releases but it's the customer toolchain already built and no way in using new releases btw due constraints in target. What i already have done is to pass the native 2.95.3 gcc testsuite with the 2.95.2-1 testsuites only for C compiler and almost succeeded (except for some issues at loop-2b.c -execute.exp- and dg.exp and mg.exp, but the rest is passing). After googling a while and reading the dejagnu doc i found that it should be recommended to have the rcp/rsh/telnet facilities in target board, and i don't have these facilities running actually on this target. What i have is a text/serial console/newlib with propietary application commands using jtag mode for that console. At the same time i have a telnet facility offered by target but not in the proper way, i mean it's the same input/output as the console/newlib described b4 but replicated on telnet port. That means i (think i) have no way of compiling/uploading the objects to target, run them and check the results as supposed following the dejagnu procedures to do it using remoted targets. My first approach is to embed the tests, i.e. memcheck.exp/*.c (gcc C only) in the src running app on target, compile the whole app with the toolchain, flash it and finally using a custom command at target console to fire/start them remotelly to check after the results, dont know yet howto integrate with dejagnu all of this. Don't know if there is a better approach to do this and at the same time as i can see i don't know how to integrate this with dejagnu framework, but after inspecting the testsuites i have from 2.95.-2.1 i saw that only for C lang, i have in execute mode for target the following .exp files/tests: - execute.exp, - ieee.exp, and - memcheck.exp These are the tests im thinking to embedd in the target to be ran later fired from console command. Hints and help really appreciated Jose. -- For unsubscribe information see http://sourceware.org/lists.html#faq
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |