RE: GCC and Freescale MPC83xx / e300 core support

[Steve Papacharalambous <stevep at freescale dot com>]

Hi Tal,

The e300c2 toolchain for cygwin hosts has been uploaded to:
www.bitshrine.org/gpp

The name of the rpm that you need is:
tc-fsl-cyg-e300c2-nptl-4.0.2-1.cygwin.i386.rpm

The source rpm has also been uploaded,

Best regards,

Steve

On Wed, 2006-11-08 at 15:46 +0200, Tal Hasid wrote:
> Hi Steve,
> 
> I'll be very glad to get the pre-built e300c2 toolchain for Cygwin
> hosts.
> 
> Thanks in advance,
> Tal
> 
> -----Original Message-----
> From: Steve Papacharalambous [mailto:stevep@freescale.com] 
> Sent: Tuesday, November 07, 2006 4:02 PM
> To: Tal Hasid
> Cc: crossgcc@sourceware.org
> Subject: RE: GCC and Freescale MPC83xx / e300 core support
> 
> 
> Hi Tal,
> 
> The toolchain that I referred to was built using crosstool.  The source
> rpm contains the build instructions and data definitions that were used
> to build the toolchain using crosstool, so you can derive .dat and demo
> files from the source rpm if necessary.
> 
> I have a pre-built e300c2 toolchain for Cygwin hosts, if you're
> interested let me know, and I'll upload it to the bitshrine site,
> 
> Best regards,
> 
> Steve
> 
> On Tue, 2006-11-07 at 13:59 +0200, Tal Hasid wrote:
> > Hi,
> > 
> > I'm working on Windows based machine using Cygwin, so I have to use 
> > crosstool in order generate the toolchain from scratch. Does someone 
> > have some example of demo-ppce300c2.sh and powerpc-e300c2.dat files 
> > for generating the MPC83xx toolchain.
> > 
> > Best regards,
> > Tal
> > 
> > -----Original Message-----
> > From: Steve Papacharalambous [mailto:stevep@freescale.com]
> > Sent: Tuesday, November 07, 2006 11:54 AM
> > To: Tal Hasid
> > Cc: crossgcc@sourceware.org
> > Subject: Re: GCC and Freescale MPC83xx / e300 core support
> > 
> > 
> > Hi Tal,
> > 
> > There is a soft float e300 toolchain available from: 
> > http://www.bitshrine.org/gpp/
> > 
> > The binary rpm is: tc-fsl-x86lnx-e300c2-nptl-4.0.2-2.i386.rpm
> > 
> > The source rpm also available from this location,
> > 
> > Best regards,
> > 
> > Steve
> > 
> > On Mon, 2006-11-06 at 16:48 +0200, Tal Hasid wrote:
> > > Hi,
> > >  
> > > I have to build a cross toolchain for the MPC832x which is based on
> > > the e300 core. Which version of gcc support the e300 core and what
> is 
> > > the correct cpu type for that (i.e. --with-cpu=) ?
> > > 
> > > I know that the e300 core is compatible with the 603e core besides 
> > > the
> > 
> > > hardware floating point unit. Does it mean that I can build the 
> > > cross
> > > toolchain for the 603e with software floating point support and it 
> > > will be fine for this cpu (MPC83xx).
> > > 
> > > Any help is appreciated.
> > > 
> > > Thanks in advance,
> > > Tal
> > > ********************************************************************
> > > **
> > > ************************
> > > IMPORTANT: The contents of this email and any attachments are
> > confidential. They are intended for the
> > > named recipient(s) only.
> > > If you have received this email in error, please notify the system
> > manager or the sender immediately and do
> > > not disclose the contents to anyone or make copies thereof.
> > > *** eSafe scanned this email for viruses, vandals, and malicious
> > content. ***
> > >
> > **********************************************************************
> > **
> > **********************
> > > 
> > > 
> > > --
> > > For unsubscribe information see http://sourceware.org/lists.html#faq
> > > 
> > > 
> > **********************************************************************
> > ************************
> > IMPORTANT: The contents of this email and any attachments are
> confidential. They are intended for the 
> > named recipient(s) only.
> > If you have received this email in error, please notify the system
> manager or the sender immediately and do 
> > not disclose the contents to anyone or make copies thereof.
> > *** eSafe scanned this email for viruses, vandals, and malicious
> content. ***
> >
> ************************************************************************
> **********************
> > 
> > 
> > --
> > For unsubscribe information see http://sourceware.org/lists.html#faq
> > 
> > 
> **********************************************************************************************
> IMPORTANT: The contents of this email and any attachments are confidential. They are intended for the 
> named recipient(s) only.
> If you have received this email in error, please notify the system manager or the sender immediately and do 
> not disclose the contents to anyone or make copies thereof.
> *** eSafe scanned this email for viruses, vandals, and malicious content. ***
> **********************************************************************************************
> 
> 


--
For unsubscribe information see http://sourceware.org/lists.html#faq