Re: BE Cross compiler for ARM-XSCALE

["Philip mathew" <philipmat at hotmail dot com>]

Hi Marc,

 I did  extract the OSELAS toolchain and the patches and projects for 
"ptxdist-0.10.6". But when I run "./configure && make && make install", the 
binary generated in the bin directory is "bin/ptxdist"
not  "bin/ptxdist-0.10.6"

Best Regards
Philip


> From: Marc Kleine-Budde <mkl@pengutronix.de>
> To: Philip mathew <philipmat@hotmail.com>
> CC: crossgcc@sourceware.org
> Subject: Re: BE Cross compiler for ARM-XSCALE
> Date: Sun, 15 Jul 2007 20:23:40 +0200
>
> Philip mathew wrote:
> > Hi Robert,
> >
> >  I tried to build the cross tool chain using OSELAS and tried the 
> > following steps you mentioned.
> >
> >  ie > ptxdist-0.10.6 select 
> > ptxconfigs/armeb-xscale-linux-gnueabi_gcc-4.1.2_glibc-2.5_linux-2.6.18.ptxconfig
> >
> >  > ptxdist-0.10.6 go
> >
> > But I am getting an error in the second step, "Error: please specify an 
> > architecure name for ipkg!".
>
> Put you installed ptxdist-0.10.6 in the $PATH.
>
> You have first have to extract OSELAS.Toolchain, then cd into it, then
> "ptxdist-0.10.6 select 
> ptxconfigs/armeb-xscale-linux-gnueabi_gcc-4.1.2_glibc-2.5_linux-2.6.18.ptxconfig"
> then "ptxdist-0.10.6 go"
>
> Marc
> --
>  Dipl.-Ing. Marc Kleine-Budde | http://www.pengutronix.de
>   Pengutronix - Linux Solutions for Science and Industry
>     Handelsregister: Amtsgericht Hildesheim, HRA 2686
>       Hannoversche Str. 2, 31134 Hildesheim, Germany
>     Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9

_________________________________________________________________
http://newlivehotmail.com


--
For unsubscribe information see http://sourceware.org/lists.html#faq