This is the mail archive of the
cygwin-xfree@cygwin.com
mailing list for the Cygwin XFree86 project.
RE: ctwm + xmkmf
- To: "'cygwin-xfree at cygwin dot com'" <cygwin-xfree at cygwin dot com>
- Subject: RE: ctwm + xmkmf
- From: Suhaib Siddiqi <ssiddiqi at inspirepharm dot com>
- Date: Wed, 22 Aug 2001 11:04:40 -0400
> -----Original Message-----
> From: Lemke, Michael ISC 1 [mailto:lemkemch@de.ina.com]
> Sent: Wednesday, August 22, 2001 11:00 AM
> To: 'cygwin-xfree@cygwin.com'
> Subject: RE: ctwm + xmkmf
>
>
> > No, I don't (doesn't come with Xfree, right?).
yes
<So I just
> > #undef XPM in Imakefile with almost the same result:
> >
> >
I do not see you undef it in Imakefile. If you want that
then you need to prefix the following with XCOM
or you can copy xpm file from Linux to same directory under Cygwin/Xfree86
PIXMAPFILES = xpm/IslandD.xpm xpm/mail1.xpm
xpm/xgopher.xpm \
xpm/IslandW.xpm xpm/nothing.xpm xpm/xgrab.xpm
\
xpm/LRom.xpm xpm/pixmap.xpm
xpm/xhpcalc.xpm \
xpm/LRom1.xpm xpm/postit.xpm xpm/xmail.xpm
\
xpm/arthur.xpm xpm/term.xpm xpm/xman.xpm \
xpm/cdrom1.xpm xpm/unknown.xpm
xpm/xnomail.xpm \
xpm/claude.xpm xpm/unread.xpm
xpm/xrn.goodnews.xpm \
xpm/datebook.xpm xpm/xarchie.xpm
xpm/xrn.nonews.xpm \
xpm/emacs.xpm xpm/xcalc.xpm xpm/xrn.xpm \
xpm/hpterm.xpm xpm/xcalc2.xpm xpm/xterm.xpm
\
xpm/mail0.xpm xpm/xedit.xpm
xpm/welcome.xpm \
xpm/audio_editor.xpm xpm/clipboard.xpm
xpm/ghostview.xpm \
xpm/xirc.xpm xpm/xmosaic.xpm
xpm/unknown1.xpm \
xpm/xrn-compose.xpm xpm/gnu-emacs1.xpm
xpm/gnu-emacs2.xpm \
xpm/gnu-emacs3.xpm xpm/gnu-emacs4.xpm
xpm/gnu-emacs5.xpm \
xpm/gnu-emacs6.xpm xpm/gnu-emacs7.xpm xpm/skull.xpm
\
xpm/3D_Expand15.xpm xpm/3D_Iconify15.xpm
xpm/3D_Lightning15.xpm \
xpm/3D_Menu15.xpm xpm/3D_Resize15.xpm
xpm/3D_Zoom15.xpm \
xpm/background8.xpm xpm/spider.xpm \
xpm/ball1.xpm xpm/ball12.xpm xpm/ball4.xpm
xpm/ball7.xpm \
xpm/ball10.xpm xpm/ball2.xpm xpm/ball5.xpm
xpm/ball8.xpm \
xpm/ball11.xpm xpm/ball3.xpm xpm/ball6.xpm
xpm/ball9.xpm \
xpm/supman1.xbm xpm/supman4.xbm xpm/supman7.xbm \
xpm/supman2.xbm xpm/supman5.xbm xpm/supman8.xbm \
xpm/supman3.xbm xpm/supman6.xbm xpm/supman9.xbm \
xpm/nt1.xpm xpm/nt2.xpm xpm/xftp.xpm xpm/welcome.xwd \
3dcircle.xpm 3ddimple.xpm 3ddot.xpm 3dfeet.xpm 3dleopard.xpm
\
3dpie.xpm 3dpyramid.xpm 3dslant
> >
> > <<Imakefile>> <<Makefile>>
> > Still xpm's fault?
> >
> >
> > Thanks,
> > Michael
> >
> >
> > It stops after Object files, when it hits the lines for xpm in
> > Imakefile. Do you have xpm directory awith files? If not
> that is the
> > cause of problems.
> >
> > Suhaib
> >
> > > -----Original Message-----
> > > From: Lemke, Michael ISC 1 [mailto:lemkemch@de.ina.com]
> > > Sent: Wednesday, August 22, 2001 10:39 AM
> > > To: 'cygwin-xfree@cygwin.com'
> > > Subject: RE: ctwm + xmkmf
> > >
> > >
> > > > Here it is:
> > > >
> > > >
> > > > <<Makefile>>
> > > >
> > > >
> > > > Michael
> > > >
> > > > >Post your generated Makefile.
> > > >
> > > > >Suhaib
> > > > >
> > > > >>
> > > > >>
> > > > >> Last night I tried to build ctwm3.5.2 after I just installed
> > > > >> the 4.1.0 release of xfree86/cygwin. Build
> instructions say to
> > > > >> run xmkmf followed by make. However, the generated Makefile
> > > > >> seems very incomplete. I tried the same on Linux to
> make sure
> > > > >> it isn't a ctwm issue but it ran just fine. Is
> there a problem
> > > > >> with xmkmf? I attach the Imakefile in case it helps to track
> > > > >> down the problem. I am not really familiar with Imakefiles.
> > > > >> But I am really impressed by xfree86 on cygwin,
> execllent work!
> > > > >> I managed to build pgplot and everything runs great.
> And so do
> > > > >> xsessions to Solaris,
> > > brilliant.
> > > > >>
> > > > >> Thanks,
> > > > >> Michael
> > > > >>
> > > > >>
> > > > >> <<Imakefile>>
> > > > >>
> > > > >>
> > > >
> > >
> >
> >
>