This is the mail archive of the firstname.lastname@example.org
mailing list for the Cygwin project. See the Cygwin
home page for more information.
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index] [Subject Index] [Author Index] [Thread Index]
Re: mount command
- To: "DJ Delorie" <email@example.com>
- Subject: Re: mount command
- From: "Richard Lyon" <firstname.lastname@example.org>
- Date: Tue, 23 Mar 1999 09:06:28 +1000
- Cc: <email@example.com>
- Delivered-To: firstname.lastname@example.org
- Delivered-To: mailing list email@example.com
- Mailing-List: contact firstname.lastname@example.org; run by ezmlm
- Sender: email@example.com
See comments below:
From: DJ Delorie <firstname.lastname@example.org>
To: email@example.com <firstname.lastname@example.org>
Cc: email@example.com <firstname.lastname@example.org>
Date: Tuesday, 23 March 1999 6:32
Subject: Re: mount command
>Right. stat() can find it, but readdir() can't. Try making the
I assume you mean 'mkdir c:\home'
So I have done done the following:
umount /home (hopefully this will clean out the reg)
rm -r /home
Exit from cygwin and start it again
Whoops it created it in c:/temp.
OK that put it in the right place where I had it before
mount D:/ /home
running mount gives the output:
Device Directory Type Flags
D: /home native text!=binary
C: / native text!=binary
and ls -F gives
So everything looks correct, as before.
find / -name .bashrc -print
.bashrc is on drive D and it is not found.
Oh well, no magical fix.
Want to unsubscribe from this list?
Send a message to email@example.com