This is the mail archive of the cygwin mailing list for the Cygwin project.

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[ANNOUNCEMENT] Updated: OpenSSH-5.9p1-1

I've just updated the Cygwin version of OpenSSH to 5.9p1-1.

This is a new upstream release.

The official release message for 5.9p1:

OpenSSH 5.9 has just been released. It will be available from the
mirrors listed at shortly.

OpenSSH is a 100% complete SSH protocol version 1.3, 1.5 and 2.0
implementation and includes sftp client and server support.

Once again, we would like to thank the OpenSSH community for their
continued support of the project, especially those who contributed
code or patches, reported bugs, tested snapshots or donated to the
project. More information on donations may be found at:

Changes since OpenSSH 5.8


 * Introduce sandboxing of the pre-auth privsep child using an optional
   sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables
   mandatory restrictions on the syscalls the privsep child can perform.
   This intention is to prevent a compromised privsep child from being
   used to attack other hosts (by opening sockets and proxying) or
   probing local kernel attack surface.

   Three concrete sandbox implementation are provided (selected at
   configure time): systrace, seatbelt and rlimit.

   The systrace sandbox uses systrace(4) in unsupervised "fast-path"
   mode, where a list of permitted syscalls is supplied. Any syscall not
   on the list results in SIGKILL being sent to the privsep child. Note
   that this requires a kernel with the new SYSTR_POLICY_KILL option
   (only OpenBSD has this mode at present).

   The seatbelt sandbox uses OS X/Darwin sandbox(7) facilities with a
   strict (kSBXProfilePureComputation) policy that disables access to
   filesystem and network resources.

   The rlimit sandbox is a fallback choice for platforms that don't
   support a better one; it uses setrlimit() to reset the hard-limit
   of file descriptors and processes to zero, which should prevent
   the privsep child from forking or opening new network connections.

   Sandboxing of the privilege separated child process is currently
   experimental but should become the default in a future release.
   Native sandboxes for other platforms are welcome (e.g. Capsicum,
   Linux pid/net namespaces, etc.)

 * Add new SHA256-based HMAC transport integrity modes from
   These modes are hmac-sha2-256, hmac-sha2-256-96, hmac-sha2-512,
   and hmac-sha2-512-96, and are available by default in ssh(1) and

 * The pre-authentication sshd(8) privilege separation slave process
   now logs via a socket shared with the master process, avoiding the
   need to maintain /dev/log inside the chroot.

 * ssh(1) now warns when a server refuses X11 forwarding

 * sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths,
   separated by whitespace. The undocumented AuthorizedKeysFile2
   option is deprecated (though the default for AuthorizedKeysFile
   includes .ssh/authorized_keys2)

 * sshd_config(5): similarly deprecate UserKnownHostsFile2 and
   GlobalKnownHostsFile2 by making UserKnownHostsFile and
   GlobalKnownHostsFile accept multiple options and default to
   include known_hosts2

 * Retain key comments when loading v.2 keys. These will be visible
   in "ssh-add -l" and other places. bz#439

 * ssh(1) and sshd(8): set IPv6 traffic class from IPQoS (as well as
   IPv4 ToS/DSCP). bz#1855

 * ssh_config(5)'s ControlPath option now expands %L to the host
   portion of the destination host name.

 * ssh_config(5) "Host" options now support negated Host matching, e.g.

     Host * !
        User mekmitasdigoat

   Will match "", "", but not ""

 * ssh_config(5): a new RequestTTY option provides control over when a
   TTY is requested for a connection, similar to the existing -t/-tt/-T
   ssh(1) commandline options.

 * sshd(8): allow GSSAPI authentication to detect when a server-side
   failure causes authentication failure and don't count such failures
   against MaxAuthTries; bz#1244

 * ssh-keygen(1): Add -A option. For each of the key types (rsa1, rsa,
   dsa and ecdsa) for which host keys do not exist, generate the host
   keys with the default key file path, an empty passphrase, default
   bits for the key type, and default comment. This is useful for
   system initialisation scripts.

 * ssh(1): Allow graceful shutdown of multiplexing: request that a mux
   server removes its listener socket and refuse future multiplexing
   requests but don't kill existing connections. This may be requested
   using "ssh -O stop ..."

 * ssh-add(1) now accepts keys piped from standard input. E.g.
   "ssh-add - < /path/to/key"

 * ssh-keysign(8) now signs hostbased authentication
   challenges correctly using ECDSA keys; bz#1858

 * sftp(1): document that sftp accepts square brackets to delimit
   addresses (useful for IPv6); bz#1847a

 * ssh(1): when using session multiplexing, the master process will
   change its process title to reflect the control path in use and
   when a ControlPersist-ed master is waiting to close; bz#1883 and

 * Other minor bugs fixed: 1849 1861 1862 1869 1875 1878 1879 1892
   1900 1905 1913

Portable OpenSSH Bugfixes:

 * Fix a compilation error in the SELinux support code. bz#1851

 * This release removes support for ssh-rand-helper. OpenSSH now
   obtains its random numbers directly from OpenSSL or from
   a PRNGd/EGD instance specified at configure time.

 * sshd(8) now resets the SELinux process execution context before
   executing passwd for password changes; bz#1891

 * Since gcc >= 4.x ignores all -Wno-options options, test only the
   corresponding -W-option when trying to determine whether it is
   accepted; bz#1901

 * Add ECDSA key generation to the Cygwin ssh-{host,user}-config

 * Updated .spec and init files for Linux; bz#1920

 * Improved SELinux error messages in context change failures and
   suppress error messages when attempting to change from the
   "unconfined_t" type; bz#1924 bz#1919

 * Fix build errors on platforms without dlopen(); bz#1929


 - SHA1 (openssh-5.9.tar.gz) = bc0cb728bbc394769f9a2ce5b8cd99dc41e12632
 - SHA1 (openssh-5.9p1.tar.gz) = be8878869bb80ce12ca79282768ffa73cc3f05fc

Reporting Bugs:

- Please read
  Security bugs should be reported directly to

OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt,
Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and
Ben Lindstrom.

To update your installation, click on the "Install Cygwin now" link on
the web page.  This downloads setup.exe to your
system.  Then, run setup and answer all of the questions.


If you want to unsubscribe from the cygwin-announce mailing list, look
at the "List-Unsubscribe: " tag in the email header of this message.
Send email to the address specified there.  It will be in the format:

If you need more information on unsubscribing, start reading here:

Please read *all* of the information on unsubscribing that is available
starting at this URL.

Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Project Co-Leader          cygwin AT cygwin DOT com
Red Hat

Problem reports:
Unsubscribe info:

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]