This is the mail archive of the
cygwin
mailing list for the Cygwin project.
Re: lpr sends a file to my printer but it just sits there in the print queue
- From: Brian Inglis <Brian dot Inglis at SystematicSw dot ab dot ca>
- To: cygwin at cygwin dot com
- Date: Wed, 8 Jan 2020 11:49:40 -0700
- Subject: Re: lpr sends a file to my printer but it just sits there in the print queue
- References: <9ca9bda6-c32e-45e0-03d6-d51e59d3c37d@comcast.net>
- Reply-to: Brian dot Inglis at SystematicSw dot ab dot ca
On 2020-01-07 13:10, Michael Coulter wrote:
> I'm running 64-bit Windows 10 with Cygwin (see attached cygcheck.out).
>
> The lpr command is sending my file to the printer, but it never prints. It
> just sits in the Windows print queue with status "Sent to printer".
>
> e.g.:
> /usr/bin/lpr -d "ET-4500" xx.txt
>
> If I print something else with say, Word, that document gets printed while
> the lpr job still sits there.
>
> My printer is an Epson ET-4500.
>
> It seems that somehow Windows or the printer needs to be told that the job
> is complete and can be printed.
>
> Any suggestions?
Are the Windows printer components to support LPR and LPD installed from Windows
setup and configured for that printer?
--
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
This email may be disturbing to some readers as it contains
too much technical detail. Reader discretion is advised.
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple