This is the mail archive of the
cygwin
mailing list for the Cygwin project.
Re: Urgent: Issue with s300 recevier in command prompt
- From: cygwinautoreply at sourceware dot org
- To: kwaldrop at usapathway dot com
- Cc: cygwin at cygwin dot com
- Date: Wed, 12 Feb 2020 22:51:10 +0100 (CET)
- Subject: Re: Urgent: Issue with s300 recevier in command prompt
- References: <5e447366.290c.371ca700.2ccc0395@usapathway.com>
>Hi,
>.This is Kevin with Pathway Communications I have made changes to ther
>receiver as instructed and am not able to gain any channels now.
>Please when able call to help assist. 8179176872
>Below is the error received when applying to command Prompt:
>Microsoft Windows [Version 10.0.18362.592]
>(c) 2019 Microsoft Corporation. All rights reserved.
>C:\Users\kwald>ping 192.168.0.11
>Pinging 192.168.0.11 with 32 bytes of data:
>Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
>Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
>Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
>Reply from 192.168.0.11: bytes=32 time<1ms TTL=128
>Ping statistics for 192.168.0.11:
> Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
>Approximate round trip times in milli-seconds:
> Minimum = 0ms, Maximum = 0ms, Average = 0ms
>C:\Users\kwald>cd \cmcs
>C:\cmcs>cmcs300 -ip 192.168.0.11 -pw Novra-S2 -save oldconfig
> 1 [main] cmcs300 3148 find_fast_cwd: WARNING: Couldn't compute
>FAST_CWD pointer. Please report this problem to
>the public mailing list cygwin@cygwin.com
>Configuration saved to oldconfig.
>C:\cmcs>cmcs300 -ip 192.168.0.11 -pw Novra-S2 -sym 9.844 -rfreq
>1021.85 -modcod "4/5 QPSK"
> 2 [main] cmcs300 6252 find_fast_cwd: WARNING: Couldn't compute
>FAST_CWD pointer. Please report this problem to
>the public mailing list cygwin@cygwin.com
>Symbol rate set.
>Receive frequency set.
>MODCOD changed successfully.
>C:\cmcs>cmcs300 -ip 192.168.0.11 -pw Novra-S2 -shsat
> 2 [main] cmcs300 9392 find_fast_cwd: WARNING: Couldn't compute
>FAST_CWD pointer. Please report this problem to
>the public mailing list cygwin@cygwin.com
> Satellite Interface Settings:
> Receiver MAC Address: 00-06-76-05-27-cf
> Receiver Mode: DVBS2
> Frequency: 1021.8 MHz
> Symbol Rate: 9.844 Msps
> ModCod: 4/5 QPSK
> Gold code: 0
> Input Stream Filter: Off
> Input Stream ID: 0
> Signal Lock: On
> Data Lock: On
> Uncorrectable Rate: 0/Second
> Packet Error Rate: 0.0000e+00
> Carrier to Noise C/N: 14.7dB
> Signal Strength: -41 dBm
>C:\cmcs>
https://cygwin.com/faq.html#faq.using.fixing-find_fast_cwd-warnings
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple