This is the mail archive of the
ecos-devel@sources.redhat.com
mailing list for the eCos project.
how to insert new port into Supported Hardware
- From: "Andrea Michelotti" <amichelotti at atmel dot com>
- To: <ecos-devel at sources dot redhat dot com>
- Date: Tue, 1 Jun 2004 16:55:14 +0200
- Subject: how to insert new port into Supported Hardware
Hi,
we did a dual core dsp, the architecture of this processor (AT572D740 ) is
based on ARM7 plus a DSP (magic).
The eCos port that I did for this target is based on AT91 (eb0).
At the moment there are two boards called AT572D740-DK1 and AT572D740-DK2
that use AT572D740 with
a Redboot image running from flash.
I would like to know if it is possible (and how) to insert this porting on
the supported hardware page and
distribution ftp.
thanks
Andrea
Andrea Michelotti
- ATMEL Rome - www.atmelroma.it
http://www.atmel.com/dyn/products/datasheets.asp?family_id=680