This is the mail archive of the
ecos-devel@sources.redhat.com
mailing list for the eCos project.
Re: loading ecos without bootloader
- From: Stephan Gatzka <stephan dot gatzka at inf dot tu-dresden dot de>
- To: ecos-devel at sources dot redhat dot com
- Cc: Martin Laabs <s8606710 at rcs dot urz dot tu-dresden dot de>
- Date: Mon, 16 Aug 2004 08:07:49 +0200
- Subject: Re: loading ecos without bootloader
- Organization: TU Dresden
- References: <20040816034301.A20049@rcs12.urz.tu-dresden.de>
- Reply-to: stephan dot gatzka at inf dot tu-dresden dot de
Hi,
> I have a ixp board with a jtag debugger. Now I'd like to load
> redboot into the ram and start it there. Because there is no
> memory map loaded and the bit 31 of the configuration register
> EXP_CNFG0 is not is not cleard and so on I can't use
> the RAM Version. I'd need a RAMRAM version. Is this posible?
Often you can configure your JTAG-Debugger to intialize the appropriate
registers. It should be possible to use the RAM version then.
Greetings,
Stephan
--
Stephan Gatzka
TU Dresden, Fakultät für Informatik
Institut für Technische Informatik
Professur Mikrorechner
Hans-Grundig-Str. 25
01062 Dresden
email: Stephan.Gatzka@inf.tu-dresden.de
Tel.: 0351/463 38473
Fax.: 0351/463 38245