This is the mail archive of the
ecos-devel@sourceware.org
mailing list for the eCos project.
Re: [ECOS] Help! I need JEENI configuration Software for a M$-PC... jserial.exe and jconfig.exe
- From: "Greg Holdren" <greghol at sbcglobal dot net>
- To: <munz at speag dot ch>, <ecos-devel at sourceware dot org>
- Date: Mon, 10 Apr 2006 12:54:24 -0700
- Subject: Re: [ECOS] Help! I need JEENI configuration Software for a M$-PC... jserial.exe and jconfig.exe
- Domainkey-signature: a=rsa-sha1; s=sbc01; d=sbcglobal.net; c=nofws; q=dns; h=message-id:from:to:references:subject:date:mime-version: content-type:content-transfer-encoding:x-priority: x-msmail-priority:x-mailer:x-mimeole; b=KVbPX+ko7njdxmxaHJDF9/wY07Jf03dE00RoyOGgoZUlNOCkcm7+G1jTFWWNsoM6u Y4AisJvxCo6DszwgzKWwA==
- References: <443AAE65.90305@speag.ch>
Do you need the setup untility? This will set the IP address or load new
firmware image to the JTAG box if you need to. If you talking about debug
software then there isnt any. It talks RDI so it will work with the ARM
SDT/ADS debugger, GNU GDB/Insight etc over the LAN port.
Greg
----- Original Message -----
From: "oliver munz @ s p e a g" <munz@speag.ch>
To: <ecos-devel@sourceware.org>; <ecos-discuss@sourceware.org>
Sent: Monday, April 10, 2006 12:13 PM
Subject: [ECOS] Help! I need JEENI configuration Software for a M$-PC...
jserial.exe and jconfig.exe
> I buyed a EPI JEENI ARM7 JTAG emulator on eBay. Unfortunatly,
> Mentor-Graphics, buyed EPI and don't support the JEENI. So i can trow
> the JEENI away - if not somebody can help me
>
> If You have a the JEENI-software-CD, let me know...
>
> Thanks
> Oliver Munz
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>