This is the mail archive of the ecos-discuss@sourceware.cygnus.com mailing list for the eCos project. See the eCos home page for more information.
Walter, Thanks for responding. I am working with an unusual eval board from Toshiba based on the TX3907. I'll keep you posted on any info I get. What processor/board are you interested in? Regards, Charles Hulcher 1/19/99 -0800, you wrote: >Which board are you planning to port it to, please? I am also >interested in porting the MIPS version of eCos. > Walter Karshat > Project Engineer > Hi/fn, Inc. > www.hifn.com > 750 University Ave. > Los Gatos, CA 95032 > (408) 399-3574 (408) 399-3501 fax > >> -----Original Message----- >> From: Charles Hulcher [SMTP:chulcher@clark.net] >> Sent: Tuesday, January 19, 1999 8:23 AM >> To: ecos-discuss@cygnus.com >> Subject: [ECOS] eCos 1.1 - I need source for Cygmon for Port to >> new TX39 board. >> >> I owuld like to port eCos to a different board than the one currently >> supported. I have found binaries of Cygmon, but no source that would >> allow >> me to port it to the new board. I'm assuming that I need Cygmon to use >> GDB >> one. >> >> Is the source for Cygmon on the JMR board available so I can modify it >> for >> my target? If not, where should I start to get Cygmon source? >> >> Thanks >> Charles Hulcher >> chulcher@clark.net >> chulcher@sterlink.com >> >