This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
Building the arm-elf development tools on windows
- To: ecos-discuss at sourceware dot cygnus dot com
- Subject: [ECOS] Building the arm-elf development tools on windows
- From: "Pragya Gupta" <pragya_g at hotmail dot com>
- Date: Tue, 02 May 2000 10:18:27 GMT
Hi!!
I am trying to build the arm-elf development tools on windows
( over eCos1.3.1) . For configuring the binary utilities , I give the
command as follows :
/i/src/binutils/binutils2./configure --target=arm-elf \
--prefix=/i/tools \
--exec-prefix=/i/tools/H-i686-pc-cygwin \
-v 2>&1 | tee configure.out
( I am using 'i' drive)
This comes out giving the following error :
BFD does not support target arm-unknown-elf.
*** Look in bfd/config.bfd for supported targets.
Configure in /i/tmp/build/binutils/opcodes failed, exiting.
Why is it happening ?
Thanks
Pragya
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com