This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Help building gcc for ARM under Cygwin?
- To: eCos Disuss <ecos-discuss at sourceware dot cygnus dot com>
- Subject: [ECOS] Re: Help building gcc for ARM under Cygwin?
- From: Fano Ramparany <Fano dot Ramparany at rd dot francetelecom dot fr>
- Date: Mon, 13 Nov 2000 08:43:05 +0100
- Organization: France Telecom
- Reply-To: Fano dot Ramparany at rd dot francetelecom dot fr
Hi Lewin,
I have installed eCos (arm-elf) on a windows host twice with no problems
(I sometimes had to run some
step twice before it works properly). Once on WindowsNT4.d once on
Windows95.
I did tested several versions of cygwin, before I found one which worked
properly.
The cygwin version I've finally used was downloaded from
ludique.u-bourgogne.fr mirror.
I have used the following Gnu components:
binutils-2.10.tar.bz2
gcc-core-2.95.2.tar.bz2
gcc-g++-2.95.2.tar.bz2
insight-5.0.tar.bz2
the following patches:
ecos-gcc-2952.pat
insight-tcl.pat
If you send us the configure.out (and make.out) file I compare with mine
and check the differences.
Fano