This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]

Re: How to run eCos in SMDK41100 board

To: "Lewin A.R.W. Edwards" <larwe at larwe dot com>
Subject: Re: [ECOS] How to run eCos in SMDK41100 board
From: Jonathan Larmour <jlarmour at redhat dot com>
Date: Wed, 31 Jan 2001 04:05:13 +0000
Cc: ecos-discuss at sources dot redhat dot com
Organization: Red Hat UK Ltd.
References: <001a01c08b2f$56472200$c408aa0a@inc.inventec> <3A7780B3.598D1676@redhat.com> <000501c08b38$345fd8e0$c408aa0a@inc.inventec> <4.3.2.7.2.20010130225032.00a96900@larwe.com>

"Lewin A.R.W. Edwards" wrote:
> 
> But ignore the instructions on how to build for arm-thumb, because it
> doesn't seem to work with any downloadable version of the gcc source tree.
> Build the regular arm-elf version.

If you are referring to the change in gcc that meant that you could no
longer configure gcc for "thumb-elf", and instead using regular arm-elf
tools with -mthumb, then that was fixed quite a while ago.

Jifl
-- 
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine

Follow-Ups:
- Re: How to run eCos in SMDK41100 board
  - From: Lewin A.R.W. Edwards

References:
- Re: How to run eCos in SMDK41100 board
  - From: james chen
- Re: How to run eCos in SMDK41100 board
  - From: Jonathan Larmour
- Re: How to run eCos in SMDK41100 board
  - From: james chen
- Re: How to run eCos in SMDK41100 board
  - From: Lewin A.R.W. Edwards

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]