RE: [ECOS] 802.11

["Jason Lin" <linjason at cwc dot nus dot edu dot sg>]

This project of mine is not going to be a standalone device, the final
product will be a PCMCIA/CardBus Card for portables. I believe the TCP/IP
network support will come from the Linux host side. BTW we are developing
our own chipset with FPGA and the final version will be put into ASIC.

Just curious if eCos will be port over to Leon architecture? We are thinking
of using this free source architecture in the final version. Currently we
will use arm7tdmi(Integrator eval board) for prototying.

I'm pretty sure when the chip is out we'll make the MAC code open-source.

-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com
[mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Nick - eCos
Developer
Sent: Tuesday, April 10, 2001 2:35 AM
To: Ecos - Discuss
Cc: Dan Conti
Subject: Re: [ECOS] 802.11


I was actually thinking about eCos software support for the chipset and
TCP/IP. I can get/make a board with an 802.11 chip set.

----- Original Message -----
From: "Dan Conti" <danc@iobjects.com>
To: "Nick - eCos Developer" <n_ecos@targus.net>
Sent: Monday, April 09, 2001 2:11 PM
Subject: RE: [ECOS] 802.11


> If I may ask, what is the context? Is it that you are looking to add
802.11
> support to eCos and need a hardware platform to work on?
>
> -Dan
>
> > -----Original Message-----
> > From: ecos-discuss-owner@sources.redhat.com
> > [mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Nick - eCos
> > Developer
> > Sent: Monday, April 09, 2001 7:32 AM
> > To: Ecos - Discuss
> > Subject: [ECOS] 802.11
> >
> >
> > Has anyone given any thought to putting an 802.11 chip set on a board
and
> > using eCos to drive it?
> >
> >
>