This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Redboot and edb7211
- To: <ecos-discuss at sources dot redhat dot com>
- Subject: [ECOS] Redboot and edb7211
- From: "Wilson Kwan" <wilson at kinesphere dot com>
- Date: Wed, 18 Apr 2001 21:03:56 -0400
Hi folks,
After downloading my 300K image via serial to my dev board many times I
decided to finally fire up redboot over ethernet. However, I'm having some
trouble getting redboot running on my Cirrus logic 7211 board and I was
wondering if anyone had any experience with it. I tried the prebuilt
binaries from anoncvs but when I reset the board it complains of a checksum
error. I see the redboot banner but after the checksum error nothing
happens. I can't seem to find any specific documentation in the redboot
manual for this board.
Also I'd like to build my own redboot images. I used the windows config tool
to configure for ebd7xxx board and selected the redboot package. I built it
for ROM and flashed it to my 7211 board. When I reset it nothing happens.
The LED status doesn't come on...nothing. Has anyone had any experience
building redboot for this board?
Thanks in advance,
Wilson