This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Help! on building ecosconfigure
- To: "'Jonathan Larmour'" <jlarmour at redhat dot com>
- Subject: RE: [ECOS] Help! on building ecosconfigure
- From: "Narayana, Venkat A." <NarayVA at nsc-msg01 dot network dot com>
- Date: Thu, 19 Apr 2001 13:08:54 -0500
- Cc: "'ecos-discuss at sourceware dot cygnus dot com'" <ecos-discuss at sourceware dot cygnus dot com>
Hi,
I have cross-compiled gcc/ld/nm/objcopy/ar/as for 'arm-elf'( i already have
these for 'arm-linux'). And, after that, when i tried to compile redboot for
ROM startup( in accordance with page23 of Redboot User's guide), i am still
getting this error.
Is 'xscale-elf' a different format? Can't i use 'arm-elf' or 'arm-linux' in
lieu
of 'xscale-elf'?
Your help is greatly appreciated.
Venkat N
-----Original Message-----
From: Narayana, Venkat A. [mailto:NarayVA@nsc-msg01.network.com]
Sent: Wednesday, April 18, 2001 1:20 PM
To: 'Jonathan Larmour'
Cc: 'ecos-discuss@sourceware.cygnus.com'
Subject: RE: [ECOS] Help! on building ecosconfigure
Hi,
I compiled ecosconfig, and tried to build redboot for ROM startup,
whence i got these errors:
What is that i am doing wrong?
_START_LOG__
xscale-elf-gcc -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef
-Woverloaded-virtual -g -O2 -fno-rtti -fno-exceptions -fvtable-gc
-finit-priority -mapcs-frame -nostdlib -Wl,-r,--whole-archive -o
/home/users/redboot.ROM/install/lib/extras.o
/home/users/redboot.ROM/install/lib/libextras.a
/usr/arm/tools/arm-linux/bin/ld: unrecognised emulation mode: elf32arm
Supported emulations: armelf_linux armelf_linux26 armelf
collect2: ld returned 1 exit status
make[1]: *** [/home/users/redboot.ROM/install/lib/extras.o] Error 1
make[1]: Leaving directory `/home/users/redboot.ROM/hal/common/current'
make: *** [build] Error 2
[root@narayva-nt redboot.ROM]# uname -a
Linux narayva-nt.network.com 2.2.5-15 #14 Wed Mar 28 10:02:40 CST 2001 i686
unknown
_END_LOG___
-----Original Message-----
From: Jonathan Larmour [mailto:jlarmour@redhat.com]
Sent: Wednesday, April 18, 2001 12:56 PM
To: Narayana, Venkat A.
Cc: 'ecos-discuss@sourceware.cygnus.com'
Subject: Re: [ECOS] Help! on building ecosconfigure
"Narayana, Venkat A." wrote:
> Moreover, i think that ecosconfig tool has something to do with
> cross-compilation.I reasoned that on the basis of input parameters
> that we pass to configure script.I went thru the 'ecos Getting started'
> manual and Redboot User's guide, but i didn't find any examples of making
> ecosconfigure tool.
> So, if i need to build Redboot ROM startup for ARM arch, then, since i use
> ecosconfig tool( page 23 of Redboot users guide), then shouldn't i compile
> ecosconfig to take care of cross-compilation? i guessing here.
No, ecosconfig is purely a host-side tool. It has no knowledge of
particular targets. Using the prebuilt ones built for Linux and Windows, if
one of those is your host, should be fine.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine