This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
MBX ecos not working on my mpc860 platform.
- To: <ecos-discuss at sources dot redhat dot com>
- Subject: [ECOS] MBX ecos not working on my mpc860 platform.
- From: "Tony Ko" <nhko at gctsemi dot com>
- Date: Thu, 24 May 2001 22:46:30 +0900
hi.
I ported mbx redboot to my mpc860 platform ( this flatform is sligthly
different mbx860 module ).
and I downloaded mbx ecos image(actually elf format) through ethernet.
I changed mbx ecos source a little bin( hardware dependent part )
because this platform is different from mbx module.
But the mbx ecos does not work on my platform.
my test flow are below.
on redboot window,
RedBoot> load -rv -b 0x10000 /tftpboot/mbxecos (mbxecos is mbx ecos elf
format image )
Raw file loaded 0x00010000-0x0003c200
==> reset vector is loaded at 0x20000
RedBoot> go 0x20000
$O494E464F3A3C6379 ~
this weird message is printed on debug window and ecos does not work.
I made mbx ecos image with mbxtime.cxx source.
what's the problem?
thanks.