This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Assabet flash problem
- To: "Swindells, Robert" <SwindellsR at genrad dot com>
- Subject: Re: [ECOS] Assabet flash problem
- From: Jesper Skov <jskov at cambridge dot redhat dot com>
- Date: 01 Jun 2001 14:05:14 +0200
- Cc: "'gthomas at cambridge dot redhat dot com'" <gthomas at cambridge dot redhat dot com>,"'nico at cam dot org'" <nico at cam dot org>,"'ecos-discuss at sourceware dot cygnus dot com'" <ecos-discuss at sourceware dot cygnus dot com>
- References: <E9AB060CCD6CD211A07C00A0C9EA227B02497E02@cheadle.uk.genrad.com>
>>>>> "Swindells," == Swindells, Robert <SwindellsR@genrad.com> writes:
Swindells,> Gary Thomas wrote:
>> On 01-Jun-2001 Nicolas Pitre wrote:
>>> I have an Assabet for which the precompiled Redboot binary from
>>> current
Swindells,> CVS
>>> seems to work just fine. It is just a bit outdated compared to
>>> the
Swindells,> current
>>> state of the source, but still it works.
>>>
>>> However if I recompile redboot myself, the resulting binary just
>>> doesn't want to recognize the flash on the board anymore:
>>>
>>> |Can't identify FLASH, sorry, man b0, dev d0, id [QRY.] stat 0
>>> |00018780: B0D0 0002 0000 0000 0000 0000 0000 0000
>>> |................| |00018790: 5152 5901 0031 0000 0000 0030 5530
>>> 5503 |QRY..1.....0U0U.| |000187A0: 060A 0F04 0404 0415 0200 0500
>>> 011F 0000 |................| |000187B0: 0150 5249 |.PRI | |FLASH:
>>> driver init failed!, status: 0x8
>>>
>>> Since it worked with older version of Redboot I guess the problem
>>> should
Swindells,> be
>>> quite dumb and someone will tell me the quick trick without me
>>> having to dive deep into the code... Right? :-)
Swindells,> Have you tried building it with the bootblock flash
Swindells,> drivers instead of the strata flash ones ?
If that's the case, use the strata driver, but define
CYGOPT_FLASH_IS_BOOTBLOCK in assabet_strataflash.h
Jesper