This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RedBoot porting problem
- To: ecos-discuss at sourceware dot cygnus dot com
- Subject: [ECOS] RedBoot porting problem
- From: Jeremy Lin <chienyul at yahoo dot com>
- Date: Wed, 13 Jun 2001 11:50:53 -0700 (PDT)
Hi,
I use CVS version of eCos for my target.
Now I have a working HAL and serial driver for
my platform(SAMSUNG KS32C50100 based), and
the gdb stub works fine on my board.
I was trying to port redboot to my platform. I
tried to compile it by choosing template "redboot"
and it compiled successfully; I also have a set of
ecm files which is copied from pid platform.
But when I load the redboot image file and run it,
instead of redboot banner, the serial port always
outputs a string like this "$T0a0f:00000000;0d:00000000;#f9",
just like what I got when using gdb stub.
Does that mean it still in gdb protocol mode? How can I get
the redboot mode? Please give me a hint..
Thanks to all!
Regards,
Jeremy Lin
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/