This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Application loading from hyper terminal
- To: Ashutosh Sharma <ashutosh_hpm at yahoo dot com>
- Subject: Re: [ECOS] Application loading from hyper terminal
- From: Gary Thomas <gthomas at redhat dot com>
- Date: Fri, 27 Jul 2001 10:20:55 -0600 (MDT)
- Cc: Jesper Skov <jskov at cambridge dot redhat dot com>,ecos-discuss at sources dot redhat dot com
- Organization: Red Hat, Inc.
On 27-Jul-2001 Ashutosh Sharma wrote:
> I have tried with all, X Y Z modems but I am not able
> to upload the file to the target hardware. :-( I have
> also downloaded the pre built software but same
> problem is there. I am using the default
> configuration. What should I do now.
What format is the data file in? Remember that RedBoot's "load"
command only handles S-record files unless the '-r' flag is used.
If you try sending some other sort of file, e.g. an ELF binary,
to the "load" command, it will fail, but the error message most
likely will be lost (consumed) by the communications program (HyperTerm).
Bottom line - all you'll see is that it failed, without any real
indication of why.