This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: eCos + RedBoot Problems!
- To: "Chris C." <hksbtx at 2bzd dot com>
- Subject: [ECOS] Re: eCos + RedBoot Problems!
- From: Jonathan Larmour <jlarmour at redhat dot com>
- Date: Fri, 03 Aug 2001 12:53:52 +0100
- CC: ecos-discuss at sourceware dot cygnus dot com
- References: <989420018530564140@2bsure.com>
"Chris C." wrote:
>
> Jifl
>
> >> 3. I found that there are only 3 templates [cygmon, stub, redboot] in the
> >> config. tool can generate the image files in the bin directory. All of
> the
> >> other templates just have the include and lib in the untitled_install
> >> directory.
>
> >If you just use the default template, then if you choose build->tests from
> >the graphical configuration tool, or type "make tests" if you are >using
> the
> >command line, then you will also get a "tests" subdirectory >underneath
> >untitled_install.
>
> In my case, I only have the redboot run on the target board. As I mention
> above, I can't find other templates (e.g. kernel) can generate .bin/.elf in
> the bin directory except redboot, cygmon and stub templates can generate
> .bin/.elf files.
> If I want to build the ecos (kernel) and the load it to the target board,
> and run it via redboot command (go), how can I do?
Tests *won't* appear in the bin directory, they will appear in the tests
directory. Please read what I wrote more carefully.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine