This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: program doesn't work with new redboot
- To: "Trenton D. Adams" <tadams at theone dot dnsalias dot com>
- Subject: Re: [ECOS] program doesn't work with new redboot
- From: Jonathan Larmour <jlarmour at redhat dot com>
- Date: Fri, 10 Aug 2001 22:28:14 +0100
- Cc: 'eCos Disuss' <ecos-discuss at sourceware dot cygnus dot com>
- Organization: Red Hat UK Ltd.
- References: <003d01c121d9$f0283030$090110ac@TRENT>
"Trenton D. Adams" wrote:
>
> My program won't work with the new redboot I just compiled. It does the
> following.
>
> $ arm-elf-gdb.exe -nw RigSystem.exe
> GNU gdb 5.0
> Copyright 2000 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public License, and you
> are
> welcome to change it and/or distribute copies of it under certain
> conditions.
> Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB. Type "show warranty" for
> details.
> This GDB was configured as "--host=i686-pc-cygwin --target=arm-elf"...
> (gdb) set remotebaud 115200
> (gdb) target remote com1
> Remote debugging using com1
> 0xe0006630 in ?? ()
> (gdb) load
> Loading section .rom_vectors, size 0x40 lma 0x20000
> Loading section .text, size 0x389c0 lma 0x20040
> Loading section .rodata, size 0x1a1b8 lma 0x58a00
> Loading section .data, size 0x1194 lma 0x72bb8
> Start address 0x20040 , load size 343372
> Ignoring packet error, continuing...
Just a download error?
> Transfer rate: 80793 bits/sec, 306 bytes/write.
> (gdb) cont
> Continuing.
> Ignoring packet error, continuing...
> Interrupted while waiting for the program.
> Give up (and stop debugging it)? (y or n) y
> (gdb)
>
> Any ideas?
set debug remote 1
Or just... try again, it could have just been a flaky download, or is it
repeatable.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine