AW: [ECOS] Problems with eCos latest package/ConfigTool

["Joerg Rapka" <joerg dot rapka at duagon dot com>]

...
There are some more errors with the latest CVS sources:

1. Error
//C/Code/eCos_CVS/ecos/packages/devs/serial/m68k/d103/current/src/d103_ser.c
In file included from
//M/Project/eCos/d103_MvbApi/d103_install/include/cyg/fileio/fileio.h:61,
                 from
//M/Project/eCos/d103_MvbApi/d103_install/include/cyg/io/serial.h:57,
                 from
//C/Code/eCos_CVS/ecos/packages/devs/serial/m68k/d103/current/src/d103_ser.c
:49:
//M/Project/eCos/d103_MvbApi/d103_install/include/sys/types.h:87: `#include'
expects "FILENAME" or <FILENAME>
make[1]: *** [src/d103_ser.o.d] Error 1

2. Error
//C/Code/eCos_CVS/ecos/packages/kernel/current/src/common/kapi.cxx: In
function `void cyg_spinlock_spin_intsave(cyg_spinlock_t *, cyg_addrword_t
*)':
//C/Code/eCos_CVS/ecos/packages/kernel/current/src/common/kapi.cxx:1011: no
matching function for call to `Cyg_SpinLock::spin_intsave (cyg_addrword_t
*&)'
//M/Project/eCos/d103_MvbApi/d103_install/include/cyg/kernel/smp.hxx:382:
candidates are: void Cyg_SpinLock::spin_intsave(CYG_INTERRUPT_STATE *)
make[1]: *** [src/common/kapi.o.d] Error 1

Perhaps, there are more error? Who can help?
NOTE: I used template "elix".


Best regards,
Joerg


-----Ursprungliche Nachricht-----
Von: ecos-discuss-owner@sources.redhat.com
[mailto:ecos-discuss-owner@sources.redhat.com]Im Auftrag von
alexander.drzeniek@strahl.de
Gesendet: Montag, 13. August 2001 13:13
An: ecos
Betreff: [ECOS] Problems with eCos latest package/ConfigTool


Hello to All,
today i get the new ecos-latest-package from skynet-cvs and after
starting the eCosConfigTool, i get follow message:

CYGPKG_HAL_SH_7750, no radio buttons are set
Requires constraint not satisfied: CYGPKG_HAL_SH_7750
Requires constraint not satisfied:
CYGDAT_REDBOOT_SH_LINUX_BOOT_ENTRY == 0x8c210000
Requires constraint not satisfied:
CYGDAT_REDBOOT_SH_LINUX_BOOT_BASE_ADDR ==
0x8c001000
Requires constraint not satisfied:
CYGDAT_REDBOOT_SH_LINUX_BOOT_COMMAND_LINE ==
"mem=16M"
Requires constraint not satisfied: 1 == CYGINT_HAL_SH_VARIANT
Requires constraint not satisfied: !
CYGHWR_HAL_SH_BIGENDIAN
Requires constraint not satisfied: CYGPKG_ERROR
Requires constraint not satisfied: CYGPKG_ERROR

Does anybody have an idea, whats going wrong??
thanks a lot

Best regards
Alexander Drzeniek
Ingenieurbuero Strahl

Aderdamm 46
40221 Duesseldorf
Tel : +49211-15755-13
Fax : +49211-15755-22