This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: AW: Problems with eCos latest package/ConfigTool
- To: Joerg Rapka <joerg dot rapka at duagon dot com>
- Subject: Re: AW: [ECOS] Problems with eCos latest package/ConfigTool
- From: Jonathan Larmour <jlarmour at redhat dot com>
- Date: Mon, 13 Aug 2001 18:34:10 +0100
- Cc: ecos-discuss at sources dot redhat dot com, alexander dot drzeniek at strahl dot de
- Organization: Red Hat UK Ltd.
- References: <NDBBKEBGMLIMMPMJHHFDAENGCOAA.joerg.rapka@duagon.com>
Joerg Rapka wrote:
>
> ...
> There are some more errors with the latest CVS sources:
>
> 1. Error
> //C/Code/eCos_CVS/ecos/packages/devs/serial/m68k/d103/current/src/d103_ser.c
> In file included from
> //M/Project/eCos/d103_MvbApi/d103_install/include/cyg/fileio/fileio.h:61,
> from
> //M/Project/eCos/d103_MvbApi/d103_install/include/cyg/io/serial.h:57,
> from
> //C/Code/eCos_CVS/ecos/packages/devs/serial/m68k/d103/current/src/d103_ser.c
> :49:
> //M/Project/eCos/d103_MvbApi/d103_install/include/sys/types.h:87: `#include'
> expects "FILENAME" or <FILENAME>
> make[1]: *** [src/d103_ser.o.d] Error 1
A new CDL variable was added. If you run an "ecosconfig check ; ecosconfig
tree" in your build repository it should pick it up.
I can't help but notice the mention of m68k. Are you working on a port?
> 2. Error
> //C/Code/eCos_CVS/ecos/packages/kernel/current/src/common/kapi.cxx: In
> function `void cyg_spinlock_spin_intsave(cyg_spinlock_t *, cyg_addrword_t
> *)':
> //C/Code/eCos_CVS/ecos/packages/kernel/current/src/common/kapi.cxx:1011: no
> matching function for call to `Cyg_SpinLock::spin_intsave (cyg_addrword_t
> *&)'
> //M/Project/eCos/d103_MvbApi/d103_install/include/cyg/kernel/smp.hxx:382:
> candidates are: void Cyg_SpinLock::spin_intsave(CYG_INTERRUPT_STATE *)
> make[1]: *** [src/common/kapi.o.d] Error 1
I'll look into this. Comment the function out in kapi.cxx for now.
> Perhaps, there are more error? Who can help?
> NOTE: I used template "elix".
>
> Best regards,
> Joerg
>
> -----Ursprungliche Nachricht-----
> Von: ecos-discuss-owner@sources.redhat.com
> [mailto:ecos-discuss-owner@sources.redhat.com]Im Auftrag von
> alexander.drzeniek@strahl.de
> Gesendet: Montag, 13. August 2001 13:13
> An: ecos
> Betreff: [ECOS] Problems with eCos latest package/ConfigTool
>
> Hello to All,
> today i get the new ecos-latest-package from skynet-cvs and after
> starting the eCosConfigTool, i get follow message:
>
> CYGPKG_HAL_SH_7750, no radio buttons are set
> Requires constraint not satisfied: CYGPKG_HAL_SH_7750
> Requires constraint not satisfied:
> CYGDAT_REDBOOT_SH_LINUX_BOOT_ENTRY == 0x8c210000
Looks like you are trying to use the dreamcast port. It's not ready. Wait
for it to be announced; or look at the links on
http://sources.redhat.com/ecos/contrib.html instead.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine