This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Port problem
- To: ecos-discuss at sourceware dot cygnus dot com
- Subject: [ECOS] Port problem
- From: Cristiano Ligieri Pereira <cpereira at ics dot uci dot edu>
- Date: Thu, 16 Aug 2001 11:00:38 -0700 (PDT)
Hi all,
I'm porting eCos to a XScale based platform. The board have Cygmon in its
Flash memory, which is invoked at reset time. I can load an eCos
application in it (I'm modifying the port to IQ80310). So far I have
modified the file PLATFORM_SETUP1, in which I change the memory map and
initialize (or re-initialize since cygmon initialize them already) all the
necessary components (caches, BTB, MMU, etc...). All this seems to work
fine. The memory mapping is changed so that I have SDRAM at address 0x0.
Now I'm a little confused on how to make the serial communication work. I
can download an application using GDB. So obviously there is a connection
between the target and the GDB in the host. What should I do to keep using
this connection to send debugging messages to the host? Or should I break
this connection and restart it somehow?
Thanks in advance,
Cristiano.
------------------------------------------------------------
Cristiano Ligieri Pereira - http://www.ics.uci.edu/~cpereira