This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

RE: Port to XScale board



On 21-Aug-2001 Cristiano Ligieri Pereira wrote:
> 
> No. I made it run from RAM only. Then I'm loading RedBoot using Cygmon and
> trying to download an eCos application using Redboot. Isn't it a good
> approach? I actually do it running eCos on the ipaq...
> 

Well, RedBoot can more than replace Cygmon [plus it's what we're
supporting now]  Perhaps some of your other problems would go away
if you were running in that mode.

That has nothing to do with the X-modem download problems you are
experiencing though.

> Cristiano.
> 
> ------------------------------------------------------------
> Cristiano Ligieri Pereira - http://www.ics.uci.edu/~cpereira
> 
> On Mon, 20 Aug 2001, Gary Thomas wrote:
> 
>> 
>> On 21-Aug-2001 Cristiano Ligieri Pereira wrote:
>> > 
>> >> Either.  Your example implies binary, but I'm not so sure about
>> >> it anyway.  If this is the "Hello world" example we talked about
>> >> last week, shouldn't you be downloading it at 0x20000?
>> > 
>> > 0x20000 is where RedBoot is running. So I'm assuming I have to put the
>> > application somewhere else and thus I'm compiling it accordingly.
>> 
>> You don't have RedBoot running from ROM/FLASH?
>> 


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]