This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Running a program from
- To: "Trenton D. Adams" <tadams at theone dot dnsalias dot com>
- Subject: [ECOS] RE: Running a program from
- From: Gary Thomas <gthomas at redhat dot com>
- Date: Fri, 24 Aug 2001 11:15:24 -0600 (MDT)
- Cc: eCos Discussion <ecos-discuss at sourceware dot cygnus dot com>
- Organization: Red Hat, Inc.
Firstly - don't send messages to ecos-maintainers use ecos-discuss.
On 24-Aug-2001 Trenton D. Adams wrote:
> I do the following after loading my image into redboot at 0x20000. I'm
> not running a RAM version of RedBoot so this should be ok at 0x20000
> right?
> RedBoot> fis create -b 0x20000 -l 0x64700 -f 0xe0040000 RigSystem
> ... Erase from 0xe0040000-0xe00c0000: ....
> ... Program from 0x00020000-0x00084700 at 0xe0040000: ....
> ... Erase from 0xe0fe0000-0xe1000000: .
> ... Program from 0x00fa7000-0x00fc7000 at 0xe0fe0000: .
> RedBoot> go 0xe0040000
Was this program configured for ROM startup? Did you adjust the
linker script so that it would run from 0xE0040000?