Re: [ECOS] Using the TCP/IP stack from the anonymous CVS server

[Richard Wicks <rich at accetnetwork dot com>]

I see,

By doing the following:
cvs -d :pserver:anoncvs@sources.redhat.com:/cvs/ecos -z 9 co -P net 

the package is automatically added.  There's just so much to read it's easy 
to miss little things.

Well, it compiles now but when I attempt to run my code, it dies.  I'm not 
even compiling TCP/IP code either - it just crashes with GDB when I try to 
step past the first automatically set breakpoint.

I'm doing the following to get a compiled kernel:

 ecosconfig new iq80310
 ecosconfig add net
 ecosconfig add CYGPKG_NET_ETH_DRIVERS
 ecosconfig tree
 make

I suspect it's an interaction problem with redboot. Any ideas?

Thanks for the tip in any case,
-Rich

On Monday 17 September 2001 01:36 pm, you wrote:
> Download the net package from the CVS repository as described here ;)
>
> http://sources.redhat.com/ecos/anoncvs.html
>
> -----Original Message-----
> From: ecos-discuss-owner@sources.redhat.com
> [mailto:ecos-discuss-owner@sources.redhat.com] On Behalf Of Richard
> Wicks
> Sent: Monday, September 17, 2001 12:54 PM
> To: ecos-discuss@sourceware.cygnus.com;
> ecos-discuss@sourceware.cygnus.com
> Subject: [ECOS] Using the TCP/IP stack from the anonymous CVS server
>
>
> I retrieved the TCP/IP stack from the CVS server, since it was
> recommended
> that I do so here:
>
> http://sources.redhat.com/ecos/getstart.html
>
> However, no .epk file is included there, which is required according to
> the
> documentation here:
>
> http://sources.redhat.com/ecos/docs-latest/tcpip/tcpip.3.html#40207
>
> Where it states that in order to add the net package to the build (I'm
> using
> Linux so I use command line) to do the following
>
> "cd packages
>  ./ecosadmin.tcl add net-1.0by.epk"
>
> If there is no "net-1.0by.epk" or ANY .epk file anywhere, what do I do?
>
> Furthermore, if I do the following:
>
> "../ecosadmin.tcl list | grep -i net"
>
> I get the following output:
>
> CYGPKG_DEVS_FLASH_FLEXANET: current
> CYGPKG_NET: current
> CYGPKG_DEVS_ETH_ARM_FLEXANET: current
> CYGPKG_HAL_ARM_SA11X0_FLEXANET: current
>
> Which seems to indicate that the NET package IS included, yet when I
> configure for my target:
>
> "ecosconfig new iq80310
>  ecosconfig add net
>  ecosconfig tree
>  make"
>
> I get the following error:
>
> "At least one network driver framework must be defined!"
>
> But I just want to compile for loopback, I don't care about a driver at
> this
> point.  I should be able to do this according to the documentation here:
>
> http://sources.redhat.com/ecos/docs-latest/tcpip/tcpip.3.html#40207
>
> So, what am I doing wrong?  Is this an error in the ecos code or is it a
>
> problem with the newest code in the CVS repository?
>
> Anybody else working with the IQ80310 StrongArm?  Should I drop using
> CVS for
> my source and use more standard packages?  What are the CVS labels that
> I
> should be working with?
>
> Thanks