This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Load Redboot RAM through serial
- To: "'Trenton D. Adams'" <tadams at theone dot dnsalias dot com>, 'eCos Discussion' <ecos-discuss at sourceware dot cygnus dot com>
- Subject: RE: [ECOS] Load Redboot RAM through serial
- From: Fabrice Gautier <Fabrice_Gautier at sdesigns dot com>
- Date: Wed, 19 Sep 2001 21:25:22 -0700
> -----Original Message-----
> From: Trenton D. Adams [mailto:tadams@theone.dnsalias.com]
> Subject: [ECOS] Load Redboot RAM through serial
>
> Is it possible to have Redboot start right after being loaded through
> the serial port on an edb7xxx board? I know, anything is possible! ;)
>
> Has anyone ever done this?
I've done this on the ARM Integrator Board.
I Used default redboot template then change startup to RAM. Loaded the image
with the ARM Boot Monitor et voila...
Regards,
--
Fabrice Gautier
Software Engineer, Sigma Designs
Fabrice_Gautier@sdesigns.com