This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Problem when using ARM E7T all template for building eCOS (I need TCP/IP stack support)
- To: "HuangQiang" <jameshq at liverpool dot ac dot uk>,"eCos" <ecos-discuss at sources dot redhat dot com>
- Subject: Re: [ECOS] Problem when using ARM E7T all template for building eCOS (I need TCP/IP stack support)
- From: "Simon" <simoncc at ms46 dot url dot com dot tw>
- Date: Thu, 8 Nov 2001 01:48:38 +0800
- References: <KIEBICHBADHFCLGCKOPDEEPJCIAA.jameshq@liv.ac.uk>
Sure, you can do that.
'Cause I did that as I said before.
But I left all stuff about this in my office and
I can not tell you how to do right now.
I do not remember where to be modified such that
you can load the network package on and develop
your ethernet driver.
Let me have a sleep at first. after entering my office,
I will try to dig out any piece of info "how..."
Simon (^_^)y
It's late here... AM 1:45 , Nov. 8th
----- Original Message -----
From: "HuangQiang" <jameshq@liverpool.ac.uk>
To: "eCos" <ecos-discuss@sources.redhat.com>; "Jesper Skov"
<jskov@redhat.com>
Sent: Wednesday, November 07, 2001 11:55 PM
Subject: [ECOS] Problem when using ARM E7T all template for building eCOS (I
need TCP/IP stack support)
I just need to use the TCP/IP support function (higher layer support) and I
am making my own device driver for the transceiver and hardware. So is there
any way I can do it?
-----Original Message-----
From: jskov@zoftcorp.adsl.dk [mailto:jskov@zoftcorp.adsl.dk]On Behalf Of
Jesper Skov
Sent: 07 November 2001 15:23
To: HuangQiang
Cc: eCos
Subject: Re: [ECOS] Problem when using ARM E7T all template for building
eCOS
>>>>> "HuangQiang" == HuangQiang <jameshq@liverpool.ac.uk> writes:
HuangQiang> Dear all: I am trying to use the ARM E7T all template (the
HuangQiang> latest ecos cvs) for building eCOS (because I need TCP/IP
HuangQiang> network support for my project.) in the ecos configuration
HuangQiang> tools 1.3.1.2. I encounter many unresolved conflicts. I
HuangQiang> let the configuration tool to resolve the problem but not
HuangQiang> successful. Have anyone tried to build a eCOS for ARM E7T
HuangQiang> board with the TCP/IP support? if so what step should I
HuangQiang> follow to build a eCOS with network support for ARM E7T
HuangQiang> board?
It's not supported out of the box since the standard E7T board does
not have the necessary transceiver and connectors.
Jesper