This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: missing component in repository
- From: Gary Thomas <gthomas at redhat dot com>
- To: "Trenton D. Adams" <tadams at theone dot dnsalias dot com>
- Cc: eCos Discussion <ecos-discuss at sourceware dot cygnus dot com>
- Date: 06 Dec 2001 11:18:42 -0700
- Subject: Re: [ECOS] missing component in repository
- References: <000901c17e80$6ca37590$090110ac@TRENT>
You need to update your CVS completely.
cvs -q update -d -P
If you don't have the '-d', new directories like the
one for the 8900 ethernet won't get copied.
On Thu, 2001-12-06 at 11:04, Trenton D. Adams wrote:
> I've been out of the loop for quite awhile now because we switched to
> another project for awhile. I did a cvs update today, and something is
> amiss.
>
> Hardware selection: warning
> The target specification lists a package
> `CYGPKG_DEVS_ETH_CL_CS8900A' which is not present in the component
> repository.
>
> I have the following two entry in the ecos.db
>
> package CYGPKG_DEVS_ETH_CL_CS8900A {
> alias { "Cirrus Logic CS8900A ethernet driver"
> cs8900a_eth_driver }
> hardware
> directory devs/eth/cl/cs8900a
> script cl_cs8900a_eth_drivers.cdl
> description "Ethernet driver for Cirrus Logic CS8900A
> controller."
> }
>
>
> target edb7xxx {
> alias { "Cirrus Logic EDB7xxx development board"
> edb7211 eb7xxx eb7211 }
> packages { CYGPKG_HAL_ARM
> CYGPKG_HAL_ARM_EDB7XXX
> CYGPKG_DEVS_PCMCIA_EDB7XXX
> CYGPKG_DEVS_ETH_ARM_EDB7XXX
> CYGPKG_DEVS_ETH_CL_CS8900A
> CYGPKG_IO_SERIAL_ARM_EDB7XXX
> CYGPKG_DEVS_FLASH_EDB7XXX
> }
> description "
> The edb7xxx target provides the packages needed to run eCos on the
> Cirrus Logic EDB7xxx development boards."
> }
>
>
> Now from what I understand, there never was anything called
> CYGPKG_DEVS_ETH_CL_CS8900A when I was last using the repository. I
> looked in "devs/eth" and there is no "cl" directory which is what this,
> apparently, new driver is supposed to exist. Why wouldn't I get updated
> with this? Does this replace the old CYGPKG_DEVS_ETH_ARM_EDB7XXX?
>
> Can I ignore the warning? I don't think so since the
> CYGPKG_DEVS_ETH_CL_CS8900A package is in the edb7xxx target.
>
> Can I simply remove the CYGPKG_DEVS_ETH_CL_CS8900A?
>
>
> Trenton D. Adams
> Extreme Engineering
> #17, 6025 - 12 St. SE
> Calgary, Alberta, Canada
> T2H 2K1
>
> Phone: 403 640 9494 ext-208
> Fax: 403 640 9599
>
> http://www.extremeeng.com