This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: missing component in repository
- From: "Trenton D. Adams" <tadams at theone dot dnsalias dot com>
- To: "'Gary Thomas'" <gthomas at redhat dot com>
- Cc: "'eCos Discussion'" <ecos-discuss at sourceware dot cygnus dot com>
- Date: Thu, 6 Dec 2001 11:21:40 -0700
- Subject: RE: [ECOS] missing component in repository
Oops, here's the discussion CC! :)
Oh, ok, great, so I'm a moron now, thanks! ;)
What's the difference between the two drivers?
> -----Original Message-----
> From: ecos-discuss-owner@sources.redhat.com
> [mailto:ecos-discuss-owner@sources.redhat.com] On Behalf Of
> Gary Thomas
> Sent: December 6, 2001 11:19 AM
> To: Trenton D. Adams
> Cc: eCos Discussion
> Subject: Re: [ECOS] missing component in repository
>
>
> You need to update your CVS completely.
> cvs -q update -d -P
>
> If you don't have the '-d', new directories like the
> one for the 8900 ethernet won't get copied.
>
> On Thu, 2001-12-06 at 11:04, Trenton D. Adams wrote:
> > I've been out of the loop for quite awhile now because we
> switched to
> > another project for awhile. I did a cvs update today, and
> something is
> > amiss.
> >
> > Hardware selection: warning
> > The target specification lists a package
> > `CYGPKG_DEVS_ETH_CL_CS8900A' which is not present in the component
> > repository.
> >
> > I have the following two entry in the ecos.db
> >
> > package CYGPKG_DEVS_ETH_CL_CS8900A {
> > alias { "Cirrus Logic CS8900A ethernet driver"
> > cs8900a_eth_driver }
> > hardware
> > directory devs/eth/cl/cs8900a
> > script cl_cs8900a_eth_drivers.cdl
> > description "Ethernet driver for Cirrus Logic CS8900A
> > controller."
> > }
> >
> >
> > target edb7xxx {
> > alias { "Cirrus Logic EDB7xxx
> development board"
> > edb7211 eb7xxx eb7211 }
> > packages { CYGPKG_HAL_ARM
> > CYGPKG_HAL_ARM_EDB7XXX
> > CYGPKG_DEVS_PCMCIA_EDB7XXX
> > CYGPKG_DEVS_ETH_ARM_EDB7XXX
> > CYGPKG_DEVS_ETH_CL_CS8900A
> > CYGPKG_IO_SERIAL_ARM_EDB7XXX
> > CYGPKG_DEVS_FLASH_EDB7XXX
> > }
> > description "
> > The edb7xxx target provides the packages needed to run eCos on the
> > Cirrus Logic EDB7xxx development boards."
> > }
> >
> >
> > Now from what I understand, there never was anything called
> > CYGPKG_DEVS_ETH_CL_CS8900A when I was last using the repository. I
> > looked in "devs/eth" and there is no "cl" directory which
> is what this,
> > apparently, new driver is supposed to exist. Why wouldn't
> I get updated
> > with this? Does this replace the old CYGPKG_DEVS_ETH_ARM_EDB7XXX?
> >
> > Can I ignore the warning? I don't think so since the
> > CYGPKG_DEVS_ETH_CL_CS8900A package is in the edb7xxx target.
> >
> > Can I simply remove the CYGPKG_DEVS_ETH_CL_CS8900A?
> >
> >
> > Trenton D. Adams
> > Extreme Engineering
> > #17, 6025 - 12 St. SE
> > Calgary, Alberta, Canada
> > T2H 2K1
> >
> > Phone: 403 640 9494 ext-208
> > Fax: 403 640 9599
> >
> > http://www.extremeeng.com
>
>