This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Neponset + CF on Redboot
Gary Thomas wrote:
> > Yes, but it's only been tested with certain makes of card. We've tested
> > with the Socket CF LPE+, and someone else confirmed the PRETEC CompactLAN
> > card worked.
>
> A couple of questions:
> * Do you actually have the Neponset board (SA1111)? I'm not sure we've
> tested it much with that in place.
> * Does this 'won't go ready' happen all the time? I've seen it happen
> with some cards, but only after they've been initialized once (after
> a reset)
>
> You could try adding some messages in the CF ethernet driver code to try
> and figure out what's happening and why it might be failing. Of
> interest might be the CIS data which gets read by that driver.
Hi, sorry for the late reply.
The card is Socket CF-LPE. I do have the Neponset attached, and the CF
card goes into the PCMCIA with a common CF to PCMCIA converter.
If it has not really been tested much (as opposed to it not working due
to some stupidity on my part :) ),
then I'll maybe try out adding messages to the driver code and testing.
Thanks,
Srijon
--
|--------------------------------|
| Srijon Biswas |
| srijon@innvo.com |
| srijon_biswas@yahoo.com |