This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
build problem for Intel IQ80310 XScale board
- From: abccs at x263 dot net
- To: ecos-discuss at sources dot redhat dot com
- Date: Fri, 1 Feb 2002 11:50:13 +0800
- Subject: [ECOS] build problem for Intel IQ80310 XScale board
hi,
I use a eCos 1.3.net + Win2000 + CygWin.I build the test for Intel IQ80310 Xcale board.
Some problem is following.
Can you help me ?
Thanks,
Tom
Following is the process for building tests:
CYGPKG_HAL_SH_7750, no radio buttons are set
"requires" constraint not satisfied: CYGPKG_HAL_SH_7750
"requires" constraint not satisfied: CYGDAT_REDBOOT_SH_LINUX_BOOT_ENTRY == 0x8c210000
"requires" constraint not satisfied: CYGDAT_REDBOOT_SH_LINUX_BOOT_BASE_ADDR == 0x8c001000
"requires" constraint not satisfied: CYGDAT_REDBOOT_SH_LINUX_BOOT_COMMAND_LINE == "mem=16M"
"requires" constraint not satisfied: 1 == CYGINT_HAL_SH_VARIANT
make: Entering directory `/e/jjp/ecos/my_80310_build'
make -r -C hal/common/current headers
make[1]: Entering directory `/e/jjp/ecos/my_80310_build/hal/common/current'
sed: -e expression #1, char 8: Unterminated `s' command
mkdir: too few arguments
Try `mkdir --help' for more information.
make[1]: *** [/ecos-e/jjp/ecos/my_80310_install/include/cyg/hal/dbg-thread-syscall.h] Error 1
make[1]: Leaving directory `/e/jjp/ecos/my_80310_build/hal/common/current'
make: *** [headers] Error 2
make: Leaving directory `/e/jjp/ecos/my_80310_build'
欢迎使用263天下邮免费信箱 http://freemail.x263.net
welcome to enjoy 263 Freemail http://freemail.x263.net
_____________________________________________________
263在线_中国人的网上家园
Tel:010-64240315 Fax:010-64240295 ?1998-2001版权所有
263服务热线 010-64262631 263@263.net.cn