ecos-discuss archive
thread index for January, 2002
This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the thread;
the notes following that are in the chronological order of when they
were received. So globally, newest messages are at the top, but within
a thread, the oldest (the start of the thread) is at the top.
If you think about it, it is confusing. Just go with the flow and
everything will be all right.
- Re: Building a Toolchain,
Erik Reikes
- Building a Toolchain,
Ramapriya Rangachar
- build problem for Intel IQ80310 XScale board,
abccs
- Chaining DSRs in Different Drivers,
Douglas Bush
- support!!!,
Jing Luo
- code genration for mips32 type processors,
H Girard
- >:confirm subscribe to ecos-discuss@sourceware.org,
abccs
- RE: gcc problem,
Doug Fraser
- Problem with interrupts,
Igor Trevisan
- gcc problem,
Rajendra Prasad
- [Fwd: Re: Redboot compilation problem.],
Jesper Skov
- (3)$B!J!*9-9p!*!K7|>^6b1~Jg8"(B
$BMxIU$-%@%$%l%/%H%a!<%k$N(B
$B$40FFb(B
,
$B%"%H%i%9(B
- RE: Adding additional serial device to Intel StrongARM SA1110,
Ho Shui Choy Stanley NCS
- Re: confused about running program on remote target,
Erik Reikes
- confused about running program on remote target,
michael shiloh
- Re: edb7xxx MAC address,
Jonathan Larmour
- edb7xxx MAC address,
Cristian VLASIN
- eCos package trimming.....,
Nilesh Tarale
- Multi-thread crash on ARM7 core,
Joris Roussel
- Re: Redboot compilation problem.,
Erik Reikes
- Redboot compilation problem.,
Erik Reikes
- Adding additional serial device to Intel StrongARM SA1110,
Ho Shui Choy Stanley NCS
- RE: memory allocation,
Jing Luo
- RedBoot, GDB_STUB and serial interrupts,
Chris Zankel
- Hanging Threads,
Douglas Bush
- Where could I find eCos package,
Frédéric GARFAGNI
- RE: Performing a soft reset on the Cirrus Logic EP7312,
Dan Conti
- Performing a soft reset on the Cirrus Logic EP7312,
Chris Sekula
- Re: Getting started with the i386 target and eCos.,
Erik Reikes
- IP configuration,
Dan Searles
- proposal modification to ecosconfig,
Donnat Eric
- Getting started with the i386 target and eCos.,
Erik Reikes
- DHCP server xid,
Robin Farine
- where can i find the info of mlt file ?,
Park Jun-Ku
- Re: anonymous CVS,
Jonathan Larmour
- memory allocation,
Jing Luo
- OpenSSL port for eCos question,
W Jensen
- RE: Clock problem with eCos 1.3.1 using uITRON compatibility,
jecer
- RE: round-robin,
Jing Luo
- Clock problem with eCos 1.3.1 using uITRON compatibility,
jecer
- System timer resolution and TCP/IP package,
Jurica Baricevic
- loading ecos application on Redboot via GDB,
satish s mantri
- Ethernet support for ARM E7T board,
Roland Caßebohm
- RE: ISR+thread synchronization problem,
Geoff Patch
- round-robin,
Jing Luo
- scanf again!,
s btx
- ISR+thread synchronization problem,
jagadisha maiya
- dynamic loading on eCos,
Dominique Henry de Villeneuve
- Re: Install redboot on ecos,
Jonathan Larmour
- got error when built ASSABET with network,
Deli Geng \(David\)
- GDB Stub on ADS8260,
N.Suresh
- Don't know why can't use scanf???,
s btx
- RE: Ecos on Redboot,
Warren Jasper
- Ecos on redboot...,
Nilesh Tarale
- How do i download the VxWorks image,
Deepak Shetty
- building redboot for nanoengine binary size problem,
Gad Hayisraeli
- ecos 2.0 release,
satish mantri
- Re: RedBoot Memory problem,
Jonathan Larmour
- how to build redboot using configtool 2.03,
Gad Hayisraeli
- init_net doesn't return. (in plain text),
Douglas Bush
- RE: init_net doesn't return.,
Dan Conti
- init_net doesn't return.,
Douglas Bush
- Sending SNMP Traps and registering an IP Address,
Crumpton, Neil
- RE: eCOS 2.0 specifications,
Tim Michals
- [Fwd: Re: loading file to redboot],
Jesper Skov
- idle thread,
Andrea Acquaviva
- eCOS 2.0 specifications,
Stefano Costa
- BSE MediaEngine flash banks + redboot configuration,
Gad Hayisraeli
- Re: device shutdown,
James Chen
- WLAN and Bluetooth PCMCIA or CF card support for eCos,
Ho Shui Choy Stanley NCS
- fcntl - function,
wysiwyh
- Reboot up, but network questions,
Michael Kelly
- audio (on Assabet),
Robert Lee
- Gameboy Advance vectors.S (dealing with BIOS),
Bill Diehls
- Q about HAL_INTERRUPT_MASK/UNMASK.,
Sergei Organov
- mk_romfs and binary mode for cygwin,
Warren Jasper
- loading file to redboot,
Nilesh Tarale
- RE: eCos TCP/IP Performance,
Doug Fraser
- eCos TCP/IP Performance,
Paul Randall
- Patch for flash,
Paul Fine
- Enabling network on Assabet/Neponset for RedBoot,
Srijon Biswas
- Now What (New Port),
Michael Kelly
- Re: eCos 2.0 planned release,
Daniel Leu
- Porting eCos to SMDK41100 (Samsung) board,
Kwong Fu Chan
- On Interruptions,
Cristiano Ligieri Pereira
- resetting the remote target,
WYSIWYH
- [Fwd: Redboot -Linux serial communication.],
Jonathan Larmour
- PCI Address Mapping,
Michael Kelly
- once more "gettimeofday",
WYSIWYH
- Lock in Cyg_Interrupt::call_pending_DSRs_inner,
David Hsu
- Problems with internal timer in XScale platform,
Cristiano Ligieri Pereira
- BOOTP/DHCP failed on eth0,
Robert Lee
- test network,
Robert Lee
- Porting ecos to Siemens C167CR-16F,
Ake Hedman
- eCOS for Motorola Coldfire?,
Stefano Costa
- gettimeofday,
WYSIWYH
- USB support in eCos 2.0?,
Daniel.Borgentun
- ppc860 build,
Nissim Machlev
- [PATCH] enlarge allowable size of diagnostic strings,
jeroen dobbelaere
- cyg_hal_diag_mangler_gdb_putc vs. interrupt latency,
Hiroshi Lockheimer
- Any support for Gigabit Ethernet board on PC,
Sam Sortais
- booting ecos help request,
Marco Brambilla
- Has anyone used an emulator or ICE with eCos and the EP7211?,
Douglas Bush
- eCOS benchmarks,
Stefano Costa
- eCos Footprint,
Stass Desyatnikov
- RE: Problem with Flash drivers, RedBoot, and Flash high in the memory map,
Doug Fraser
- Re: Atmel/AT91/ARM SERIAL PORT DRIVER REWRITTEN WITHHARDWARE BUFFERING,
Jesper Skov
- Atmel/AT91/ARM SERIAL PORT DRIVER REWRITTEN WITH HARDWARE BUFFERING,
psheer
- mistake: off_t should be signed,
Donnat Eric
- AT91-EB40 Out of Memory,
Greg Holdren
- Problem with Flash drivers, RedBoot, and Flash high in the memory map,
Paul Fine
- Re: Redboot -Linux serial communication.,
Jonathan Larmour
- dns code,
Suranjan Choudari Lingutla
- gethostbyaddr() implemented?,
Dan Searles
- missing header file simplelock.h or __ECOS not defined??,
Warren Jasper
- Time base,
Igor Trevisan
- net threads priority,
Andrea Acquaviva
- How can I ping the target from my host?,
Shulin Cui
- network questions,
Andrea Acquaviva
- RE: RE: ECOS APPLICATION - $ PROMPT RETURNED BUT w/o CVS REPOSITORY,
Subodh
- RedBoot for AM186cc..,
Pannaga Bhushan
- RedBoot Checksum Failure,
Tim Wiess
- Meaning of Mbuf statistics,
chandrag
- network problem,
Andrea Acquaviva
- Guidance on loaction of new FLASH device code,
Paul Fine
- Re: Ping problem ? (edb7209 with ep7212),
Shulin Cui
- ecos on the Coldfire?,
Frank DeLuca
- Re: Performance patch to termios code,
Jonathan Larmour
- networking options,
Andrea Acquaviva
- Re: gets() and task scheduling stopped,
Sam Sortais
- Re: ECOS APPLICATION - $ PROMPT RETURNED BUT w/o CVS REPOSITORY,
Jonathan Larmour
- Performance patch to termios code,
psheer
- Ping problem ? (edb7209 with ep7212),
Shulin Cui
- again: server_test dosn't work,
Roland Caßebohm
- Can eCOS working with Nios(Altera Device)?,
HuangQiang
- eCos configuration error,
satya kumar
- Running ecos application for target ARM procsesor,
Subodh
- gets() and task scheduling stopped,
Sam Sortais
- C language watchdog timer API?,
Grant Edwards
- PC Booting,
Richard Barry
- Mirroring ecos cvs repository,
Stefano Costa
- cant access cvs repository,
satya kumar
- eCos port to NPWR?,
Stephen Morgan
- Strange linker warning about interworking (ARM),
Fabrice Gautier
- server_test dosn't work,
Roland Caßebohm
- RE: Problem about writing IO device driver,
Dorau Kai
- AT91 extended internal SRAM,
Robert Martin
- OpenSSL available for FTP..,
David Airlie
- Problem about writing IO device driver,
HuangQiang
- RE: AT91 USART usage question,
Frank Rolsted Jensen (FRJ)
- Fw: Can't download/trace hello.c example using gdb,
jf simon
- AT91 USART usage question,
harri.siirtola
- Booting from floppy and debug,
Roland Caßebohm
- ecos on redboot,
satish s mantri
- RE: redboot problem,
Gustav Kälvesten
- Test mail - please ignore,
Jonathan Larmour
- ecos-discuss mail to sourceware.cygnus.com,
Jonathan Larmour
- Problem building development tools for ARM,
HuangQiang
- Port ecos to Ti dsp tms320 serial .,
xiaocy
- Re: Porting of PPP to the eCos operating system,
Erik Aagaard Knudsen
- ecos platform porting to MPX860,
diego
- redboot problem,
flagship
- RedBoot : Assabet instability,
Eric BENARD / FREE
- Redboot -Linux serial communication.,
umesh jaiswal
- RE: IRQs and Scheduler Lock,
sams
- Redboot / eCos on Other iPAQs than H3650,
David Oberbeck
- noreturn macro patch,
Wade Jensen
- JFFS2 Flash Filing System and Audio Drivers for Compaq Ipaq,
Dominic Jan Ostrowski
- Assembler warning after binutils upgrade,
harri.siirtola
- RE: Question about "Running the Program From ..."?,
Ravi Kumar B S
- cyg_thread_create(),
Fernando Herrera
- Question about "Running the Program From ..."?,
HuangQiang
- Porting of PPP to the eCos operating system,
Erik Aagaard Knudsen
- make error,
satya kumar
- configtool2.03 could not open ecos.db under linux,
KALYAN CHEKRAVARTHY
- cvs get newest version behind a firewall how to,
Zimin Cai
- Re: added poll function,
Wade Jensen
- Re: recvfrom patch,
Wade Jensen
- Multi-ICE support,
Jason Lin
- Re: How to download the latest documentation,
Jonathan Larmour
- Re: Ecos network stack debugging.,
Jonathan Larmour
- IRQs and Scheduler Lock,
Sam Sortais
- Re: ARM-tools building,
Grant Edwards
- Re: Native file access under eCos synthetic (stat),
Bart Veer
- problem building ecos tests,
KALYAN CHEKRAVARTHY
- ethernet driver problem when line reconnected,
Damir Salantic
- Q: Serial Port Non-Echo?,
David Oberbeck
- added poll function,
Wade Jensen
- recvfrom patch,
Wade Jensen
- Port to Inrinsyc Cerf Cube.,
Pieter Truter
- ecos.db,
npyatkov
- Binary file generation revisited,
harri.siirtola
- eCOS article in Embedded Systems 1/02 issue,
Tim Michals
- Re: Neponset + CF on Redboot,
todd.kallam
- RE: ecosconfig patch,
Patrick Doyle
- RE: PowerPC vector base location,
Patrick Doyle
- RE: A C++ question regarding the delete operator,
Chris Sekula
- Assembler errors.,
surya prakash
Mail converted by MHonArc 2.5.1