This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Breakpoint and Ctrl-C problem on ADS board
- From: Paul Fine <pfine at delcomsys dot com>
- To: "N.Suresh" <nsuresh at cdotb dot ernet dot in>
- Cc: "eCos discuss mailing list, eCos discuss mailing list" <ecos-discuss at sources dot redhat dot com>,Patrick Doyle <wpd at delcomsys dot com>
- Date: Fri, 08 Feb 2002 08:56:38 -0500
- Subject: Re: [ECOS] Breakpoint and Ctrl-C problem on ADS board
Were you able to get RedBoot running in high RAM with by importing
redboot_ROMRAM.ecm?
At 09:57 PM 2/7/02 +0530, you wrote:
>Hi all,
> I am able to generate a GDB stub image which can be downloaded to RAM,
> download the code (relocated "hello" application ) using
> powerpc-eabi-gdb from host.
>
> If i continuosly execute by giving,
>
>(gdb) jump *START_ADDRESS
> it is printing the "hello world"
>
> if i put a breakpoint at main, i am not able to break. the output is
>
>(gdb) b main
>(gdb) continue
>Continuing.
>
> After this Ctrl-C is also not working.
> Anything missing in the stub building...
>
>thanx in advance
>bye
>--
>!============================================================================!
>= Suresh N., Research Engineer, C-DoT, Bangalore. =
>= Call me at : OFF: 2383951(Dir) / 2263399 (268) RES: 3334248 =
>= Alternate email : nsur_mys@email.com =
>= QOT: For fast-acting relief, try slowing down.
>!============================================================================!
>