This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot Image download via Network...
Sir,
I refered to the link specified by You, and there it is said to use the
command fconfig.
But, if I type help from the redboot prompt fconfig is not listed.
So where shall I use this fconfig.And also, How to configure the target to
use BOOTP?
Kindly help in this regard
Thanks in Advance,
Krishna Mohan.
----- Original Message -----
From: Jesper Skov <jskov@redhat.com>
To: venkatesh <venkatc@in.ceeyes.com>
Cc: eCos mailing list <ecos-discuss@sources.redhat.com>
Sent: Wednesday, February 13, 2002 6:36 PM
Subject: Re: [ECOS] Redboot Image download via Network...
> On Wed, 2002-02-13 at 13:31, venkatesh wrote:
> >
> >
> > Hi,
> > I built redboot.bin successfullly using ecos1.3.1 and with config tool
> > 1.3.net. My platform is i386 PC. I am working with cygwin on win2k.
> > My intention is to load and execute the hello.exe image through
network.
> > My target PC has a Intel Pro 82559 NIC card.
> > Now when I boot the i386 PC with the dd'd redboot floppy it is
displaying
> > the following...
> >
> > [snip]:
> > "Ethernet eth0 : MAC address: 00:02:b3:20:05:34.
> > Can't get BOOTP info for device !"
> >
> > Now How to get BOOTP enabled ?
> > Is BOOTP required for network debugging?
> > How to enable my target PC thro network via DHCP.
>
> Please see http://sources.redhat.com/fom/ecos?file=77
>
> Jesper
>
>
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
>
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss