This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Problem with debug test program
- From: Bill Siegmund <ctc-dsl at pacbell dot net>
- To: ecos-discuss at sources dot redhat dot com
- Date: Mon, 18 Feb 2002 21:30:47 -0800
- Subject: [ECOS] Re: Problem with debug test program
Jing,
The start of your message
"(gdb) remote target com2
Remote device not open"
makes clear that GDB itself
has not established a serial link
with the IQ80310 target.
The reference manual for the current version of the IQ80310
http://developer.intel.com/design/iio/manuals/273431.htm
makes clear in Appendix A that the baudrate should be 115200.
If you are not sure your version of xscale-elf-gdb is working,
get the current tool chain from Intel's WWW site
http://www.intel.com/design/intelxscale/dev_tools/010827/index.htm
Then simply follow the instructions in Appendix A of the
"Intel IQ80310 Evaluation Platform Board Manual" that I cited above.
Bill Siegmund
Cal-Tex Computers, Inc.
1080 Rebecca Dr.
Boulder Creek, CA 95006
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss