This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: at91hal_platform_setup.h question


On Wed, 2002-06-19 at 22:39, Tim Drury wrote:
> 
> The following lines appear in hal_platform_setup.h:
> 
> #if defined(CYG_HAL_STARTUP_ROMRAM)
>         ldr     r0,=0x01010000          // Relocate FLASH/ROM to on-chip RAM
>         ldr     r1,=0x02000000          // RAM base & length
>         ldr     r2,=0x02010000
> ...
> 
> Is there any particular reason the RAM and ROM addresses and lengths
> are hard-coded here?  Why not put the constants defined in
> mlt_arm_at91_eb40_ramrom.h in there?

A good idea - please send a patch :-)


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]