ecos-discuss archive
thread index for July, 2002
This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the thread;
the notes following that are in the chronological order of when they
were received. So globally, newest messages are at the top, but within
a thread, the oldest (the start of the thread) is at the top.
If you think about it, it is confusing. Just go with the flow and
everything will be all right.
- Expediteur : Claude DENNERY ,,
rd32
- What is do_flash_init ?,
Khasim
- Re: nested interrupt,
=?gb2312?B?1cUgwcE=?=
- RedBoot file system code,
Chris LaCivita
- I2C / SPI / HDLC driver,
Raphael COTTY
- What should be changed to have fis for my flash,
Khasim
- Memory usage question about the new_net template,
Qiang Huang
- driver support for multicast,
Srinivas Surabhi
- sorry-mistake,
arun%anwsi.com@mail3.srivari.net
- simple eCos profiler,
NavEcos
- Redboot TFTP problem.,
Khasim
- [patch] net/eth_drv.c,
Motoya Kurotsu
- RE: (gdb) Couldn't establish connection to remote target,
Gary Thomas
- Re: FreeBSD-Stack not responding,
Christoph Csebits
- Re: Re: FreeBSD-Stack not responding,
Wolfgang Heppner
- <Possible follow-ups>
- Re: FreeBSD-Stack not responding,
Christoph Csebits
- Re: Re: FreeBSD-Stack not responding (Update),
Christoph Csebits
- Re: Re: FreeBSD-Stack not responding (Update),
Andrew Lunn
- Re: Re: FreeBSD-Stack not responding,
Christoph Csebits
- RE: Re: FreeBSD-Stack not responding,
Bob Ray
- Re: Re: FreeBSD-Stack not responding,
Christoph Csebits
- Re: Re: FreeBSD-Stack not responding (Update),
Christoph Csebits
- Re: Re: FreeBSD-Stack not responding (Update),
Gary Thomas
- Re: Re: FreeBSD-Stack not responding (Update),
Christoph Csebits
- Re: Re: FreeBSD-Stack not responding (Update),
Andrew Lunn
- Re: Re: FreeBSD-Stack not responding (Update),
Gary Thomas
- Re: Re: FreeBSD-Stack not responding (Update),
Wolfgang Heppner
- (gdb) Couldn't establish connection to remote target,
Rolf Kistler
- Allocate memory from new section,
Daniel Lidsten
- Re: GDB stubs problems ARM/AT91/EB40 -,
Marc Pignat
- redboot?-samsung,
arun%anwsi.com@mail3.srivari.net
- arm-gdb-error,
arun%anwsi.com@mail3.srivari.net
- ECOS and simulators,
Gregg C Levine
- nested interrupt,
=?gb2312?B?1cUgwcE=?=
- redboot load command on ipaq,
Kevin Moule
- power management question,
Jani Monoses
- _flash_xxx() in flash_am29xxxxx.inl,
Motoya Kurotsu
- Where to add diagnostic routines in redboo?,
Khasim
- approch to build eCos applications with autotools.,
Masato Taruishi
- FreeBSD-Stack not responding,
Wolfgang Heppner
- problem with CF card not ready & problem with [xyz]modem,
Celine Latulipe
- Re: sid,
Scott Dattalo
- Big endian ARM HAL_WRITE_UINT8 problem,
Roland Caßebohm
- How to send questions on mailing list.,
M.PREM KUMAR
- RE: Undefined reference to __divsi3,
Ravi Kumar B S
- arguments to main,
Tracy Jones
- Undefined reference to __divsi3,
Kishorekumar D
- ARM-elf cross compiling error,
Vinayak P Risbud
- arm-simulator,
arun%anwsi.com@mail3.srivari.net
- Pb sur la flash,
Tristan CORCELLE
- debug method,
Lin Ming
- ecos ping 50% packet loss solved temporarily -- thanks to ecos-discuss,
Khasim
- fatal error:set_priority(),
=?gb2312?B?1cUgwcE=?=
- Re: arm-elf-gcc,
GREGHOL
- arm-elf-gcc,
Mike A
- eb40a RIP,
Tim Drury
- GDB,
Tristan CORCELLE
- QUESTION - generic flash usage,
Jani Monoses
- Re: Unresolved conflict,
Venkatesh
- Unresolved conflict,
Venkatesh
- Undefined Instruction - gdb,
Vinayak P Risbud
- Re: Help me please...,
Jesper Skov
- Rép. : at91 hal,
Marc Pignat
- Help me please...,
Mike A
- [patch] flash_am29xxxxx.inl,
Motoya Kurotsu
- at91 hal,
Thomas Koeller
- RE: port eCos to nios,
Retallack, Mark (Poole)
- code fatal error!,
=?gb2312?B?1cUgwcE=?=
- remote gdb debugging,
Vinayak P Risbud
- port eCos to nios,
blue
- Re: eb40a target submitted,
GREGHOL
- RE: OT: Strange sender address (was Re: profiler & memory leak detector),
Dan Conti
- DNS code doesn't work on big-endian machine.,
Mervyn Wongso
- profiler & memory leak detector,
NavEcos
- eb40a target submitted,
Tim Drury
- remote debugging,
Vinayak P Risbud
- RE: ping is resulting in 50% packet loss.,
George Sosnowski
- No ROM monitor - How to test my code,
Tristan CORCELLE
- linux-synthetic-target-error,
arun%anwsi.com@mail3.srivari.net
- MIPS32 Cache FLUSH/STORE macros not defined for writeback caches?,
David Marqvar (DAM)
- linux-synthetic-target,
arun%anwsi.com@mail3.srivari.net
- synthetic-target-error,
arun%anwsi.com@mail3.srivari.net
- beginner question,
taraben.a
- remote debugging Redboot,
Vinayak P Risbud
- ecos strerror (i386),
Robby Ku
- ping is resulting in 50% packet loss.,
Khasim
- Re: making and running tests,
Tim Drury
- AW: memory layout tool for configtool2,
Jones, Michael
- memory layout tool for configtool2,
Masato Taruishi
- 50% PACKET loss when I ping to the Board.,
Khasim
- compact flash - slightly off topic,
Tim Drury
- Re: =?gb2312?b?u/nS8svjt6jIw7j20NS7r0ZMQVNItPPP1Mnxzf4=?=,
Iztok Zupet
- =?GB2312?B?u/nS8svjt6jIw7j20NS7r0ZMQVNItPPP1Mnxzf4=?=,
e@163.com.tw
- AW: crc16 - CCITT,
Jones, Michael
- crc16 - CCITT,
Vinayak P Risbud
- making and running tests,
Tim Drury
- AW: compile error,
Erik Lins
- Driver can't set multi-cast mode,
Iztok Zupet
- compile error,
Erik Lins
- Re: ecos for ATLAS (MIPS 4Kc),
Mike A
- Problem with TCP/IP Stack,
Your Name
- Want to write a new device driver.,
Khasim
- eCos Build Problem AGAIN,
Robby Ku
- Sequence of bring-up code on MBX860,
Barton Meeks
- Red Hat Flip-Flops on Future of eCos,
Bruce Smith
- help on building error on ecos for e7T,
francila
- MPC860 and IMMR location,
Barton Meeks
- vmWare,
Iztok Zupet
- how to store the application into the flash memory? (ARM E7T),
Qiang Huang
- twothreads.c-error,
arun%anwsi.com@mail3.srivari.net
- Message boxes - good/bad practices,
Pete Barrie
- redboot load file broken in cvs,
Tim Drury
- Newbie questions,
Madhu Lakshmanan
- RedBoot configuration file,
Jose Souto
- i386 PC target building problem on Windows2000 host,
Aviv Temelman
- C++ STL and ecos,
George Sosnowski
- make tests compile error for eb40,
Tim Drury (by way of Tim Drury <tdrury@siliconmotorsports.com>)
- hello-world-segmentation fault,
arun%anwsi.com@mail3.srivari.net
- i386 PC Target building problem,
Raghavendra M. Rangaiah
- RE: serial port ARM e7t problem,
Ravi Kumar B S
- eCos pre-v2.0,
Jose Souto
- i386 with i82559 - Problems...,
Jones, Michael
- i386 new_net linker error...,
Jones, Michael
- serial port ARM e7t problem,
Vinayak P Risbud
- RE: EB40A port is done!,
Koeller, T.
- RE: EB40A port is done!,
Gary Thomas
- RE: EB40A port is done!,
Gary Thomas
- Re: EB40A port is done!,
Tim Drury
- <Possible follow-ups>
- RE: EB40A port is done!,
Koeller, T.
- RE: EB40A port is done!,
Doug Fraser
- RE: EB40A port is done!,
Koeller, T.
- RE: EB40A port is done!,
Koeller, T.
- On ecos's construction,
=?gb2312?B?1cUgwcE=?=
- On,
zhlg_shuhan
- fconfig in redboot (i386),
Robby Ku
- samsung-gcc,
arun%anwsi.com@mail3.srivari.net
- AW: #include <new> in mqueue.cxx,
Jones, Michael
- Building a New Tree for EB40,
Greg Holdren
- Should I used init_all_network_interfaces???,
Khasim
- Ping problem in TCP/IP,
Khasim
- Opening ELF file in GDB (MIPS 32 Little endian),
David Marqvar (DAM)
- Redboot Version,
anton.poon
- RE: #include <new> in mqueue.cxx,
Jones, Michael
- eCos THUMB support,
Marc Pignat
- Rép. : Re: #include <new> in mqueue.cxx,
Marc Pignat
- EB40A port is done!,
Tim Drury
- On RTC's isr!,
zhlg_shuhan
- #include each other,
zhlg_shuhan
- #include <new> in mqueue.cxx,
Jones, Michael
- Problem with serial driver(i386 platform),
AnandRaj Ensys
- i386 eCos memory limit??,
Jones, Michael
- ARM7 problem with ldr assembly instruction,
benny
- Fec driver TCP/IP with hello world application ---- problem,
Khasim
- Question about the data item meaning in Real-time characterization table. Ave, Min? under Confidence Thanks,
Qiang Huang
- RE: how breakpoint instruction execute,
Robert Cragie
- Question about the eCOS characteristic?,
Qiang Huang
- how to implememt my assert and trace?,
zhlg_shuhan
- Where in ecos is the external interrupt handler routine.,
Khasim
- FEC interrupt registration problem,
Khasim
- Problem Problem Problem (i386),
Robby Ku
- malloc/new in DSRs,
George Sosnowski
- cyg_user_start() in a library,
Patrick Doyle
- Re: Big endian ARM HAL_WRITE_UINT8 problem (ecos 1.3.1),
Mark Salter
- flash driver interface questions,
Jani Monoses
- Building eCos on a I686 for a Ix86 Target,
Jones, Michael
- MPC860: Enabling Datacache does not work,
Wolfgang Heppner
- Problem in DHCP requests,
Khasim
- typos in standalone eth_drv,
Jani Monoses
- DSR problem,
Vinayak P Risbud
- problem of serial h/w buffer in ecos.,
Anand Chaudhari
- how to add net package,
Venkatesh
- Re: PowerPC FEC interrupt handler problem,
Wolfgang Heppner
- how breakpoint instruction execute,
zhlg_shuhan
- PowerPC FEC interrupt handler problem,
Khasim
- Big endian ARM HAL_WRITE_UINT8 problem (ecos 1.3.1),
Dirk Sigurdson
- Query,
Robin Dua
- Interrupt Handler,
Vinayak P Risbud
- init_all_network_interfaces problem with new stack,
Christoph Csebits
- samsunf-gcc,
arun%anwsi.com@mail3.srivari.net
- Redboot Console,
Vinayak P Risbud
- new_net compilation failure,
Jani Monoses
- LIBM problem with configtool 1.3.net,
Wolfgang Heppner
- Compiler bug (arm-elf-gcc)?,
llandre
- On linker script,
zhlg_shuhan
- errno problem building FreeBSD stack for viper,
Wolfgang Heppner
- Re: cygpcre.dll solved?,
Jose Souto
- (ecos)-problem,
arun%anwsi.com@mail3.srivari.net
- Gary Thomas wrote:On Tue, 2002-07-09 at 07:36, brenner joel wrote:Hi all!I'm trying to use the SERIAL_GENERIC_16X5X serial driver for my custom target. (I've used arm/pid serial driver as example)When I compile the kernel I've the following error message:/home/brenner/ecos/packages/devs/serial/generic/16x5x/current/src/ser_16x5x.c/home/brenner/ecos/packages/devs/serial/generic/16x5x/current/src/ser_16x5x.c:213:44: cyg/io/arm_rms_extern_ser.inl: No such file or directoryand this is right because no inline file is placed cyg/io/.In the cdl file of rm_rms_extern_ser following paths are defined... define_proc { puts $::cdl_system_header "/***** serial driver proc output start *****/" puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_INL <cyg/io/arm_rms_extern_ser.inl>" puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_CFG <pkgconf/io_extserial_arm_rms.h>" puts $::cdl_system_header "/***** serial driver proc output end *****/" }...witch are used to configure the SERIAL_GENERIC_16X5X driverMy question is: where I've to define a command witch copies devs/serial/arm/rms/current/include/arm_rms_extern_ser.inl to <cyg/io/arm_rms_extern_ser.inl> and what is this command?Just use the "include_dir" CDL command in the same file that hasthe "define proc". e.g. include_dir cyg/ioThis will cause the include files (from the package .../includedirectory) to be placed in the <cyg/io/...> directory."include_dir" CDL command is already there :................cdl_package CYGPKG_IO_EXT_SERIAL_ARM_RMS { display "RMS extern serial device drivers" parent CYGPKG_IO_SERIAL_DEVICES active_if CYGPKG_IO_SERIAL active_if CYGPKG_HAL_ARM_RMS requires CYGPKG_ERROR include_dir cyg/io description " This option enables the extern serial device drivers for the RMS ." doc redirect/ecos-device-drivers.html cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED { display "Generic 16x5x serial driver required" } define_proc { puts $::cdl_header "#define CYGPRI_IO_SERIAL_GENERIC_16X5X_STEP 4" } define_proc { puts $::cdl_system_header "/***** serial driver proc output start *****/"Re:Problem using SERIAL_GENERIC_16X5X serial driver,
brenner joel
- Problem using SERIAL_GENERIC_16X5X serial driver,
brenner joel
Redboot Question,
anton.poon
Arm interrupt vector table,
Vinayak P Risbud
Re: priority tasks and mutex,
Andrew Lunn
TCP stack not delaying/piggybacking ACKs?,
Grant Edwards
DiskOnChip flash support,
Iztok Zupet
RE: why STACK_FRAME_PPC_SIZE was defined 56?,
Luoqi Chen
Re: Redboot DHCP and gateway support,
todd.kallam
microwindows under ecos 2.0,
Woller, Thomas
priority tasks and mutex,
Raphael COTTY
Enable Thumb instruction set and interworking,
Marc Pignat
mcf5272c3 build error,
Ilko Iliev
Unable to execute twothreads.c,
Khasim
Couldn't start user program with the old ecos repository.,
Qiang Huang
RE: Problem building with networking for i386,
Björn Runåker (QIC)
including flash,
Tim Drury
Problem building with networking for i386,
programmer
CYGPKG_SDL: there are no version subdirectories,
Greg Holdren
why STACK_FRAME_PPC_SIZE was defined 56?,
zhlg_shuhan
about layout of code,
zhlg_shuhan
On TRACE and INSTRUMENT of ecos,
=?gb2312?B?1cUgwcE=?=
Re: ezmlm warning,
Gregg C Levine
Interrupt doesn't work witth the new ecos repository. ref: ARME7T board.,
Qiang Huang
ecos port 8260,
Raghavendra M. Rangaiah
RE: Using GCC 3.0 with eCos,
Koeller, T.
Fw: Re: Question about the ethernet hardware device driver?,
Jani Monoses
On ecos interrupt process,
=?gb2312?B?1cUgwcE=?=
Using GCC 3.0 with eCos,
Srdjan Sobajic
RE: Serial getc problem,
Daniel Lidsten
Question about the ethernet hardware device driver?,
Qiang Huang
Serial getc problem,
Daniel Lidsten
Re: ecos problem,
Jose Souto
eCos CookBook documentation project?,
Iztok Zupet
Re: Signal handling,
Roland Caßebohm
Signal handling,
Roland Caßebohm
RE: code questions:,
aacquaviva
code questions:,
zhlg_shuhan
diag_printf,
Andrew Lunn
dsr-list NULL,
Vinayak P Risbud
On ecos startup squeue:copy vectors,
zhlg_shuhan
Re: SNDS Ethernet,
Gary Thomas
Re: Hi Please See to my problem in eCos,
Gary Thomas
Re: I need some clarifications regarding ecos,
brenner joel
e7t crash,
Vinayak P Risbud
on "a.out,COFF,ELF"targets,
zhlg_shuhan
problem with memory allocation on SNDS-100 board,
benny
lwip& redboot question,
Jani Monoses
EB40 standalone application,
brenner joel
diag_printf problem,
Prashant M Naik
nuova chat mutitasking,
jusy
Re: On ecos exception process,
Nick Garnett
registering serial devices,
Shari Vietry
e7t write problem,
Vinayak P Risbud
RE: build error (Invalid token in expression),
peter_ku
The whole flash architecture with jffs2 filesystem!,
=?gb2312?q?gu=20xm?=
Re: source code credits,
Jani Monoses
Re: Latest eCos CVS docs with search facility,
Holger Schurig
Mail converted by MHonArc 2.5.8