This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Is TCP /IP stack necessary for remote tcp -- GDB
- From: Gary Thomas <gary at chez-thomas dot org>
- To: Khasim <khasim at iwavesystems dot com>
- Cc: eCos Discussion <ecos-discuss at sources dot redhat dot com>
- Date: 06 Aug 2002 10:02:04 -0600
- Subject: Re: [ECOS] Is TCP /IP stack necessary for remote tcp -- GDB
- References: <000f01c23d61$cd9d10e0$9301a8c0@iwave013>
On Tue, 2002-08-06 at 09:56, Khasim wrote:
> Hi
> Greetings
>
> I have ported Redboot along with stubs. I am able to debug using the serial
> port.But with TCP/IP I am not able to debug.
>
> 1. The connection is established between GDB and board.
> 2. I am able to download a file.
> 3. I am able to view registers and memory.
>
> If I give continue it is not stopping at breakpoint.But it is stopping in
> case of serial port.
>
> Is Full TCP/IP stack porting is necessary for operating GDB using remote tcp
> ?
>
GDB stubs with TCP/IP is only supported via RedBoot. Start with it.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss