This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Loading using serial cable
- From: "Nikhil R." <nikhil_r at mindtree dot com>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Tue, 25 Feb 2003 14:46:02 +0530
- Subject: [ECOS] Loading using serial cable
Hi All,
We tried to load an application thru the serial cable at the Redboot prompt.
We connected our i386-pc target's COM1 to our Linux hosts COM1(/dev/ttyS0).
We tried the following command at the Redboot prompt to do so. "load -v -m
xmodem <filename>". we tried the same with ymodem. We got the following
output:
CCCCCCCCCC$$$$$$$$$$$$$$$$ Can't load <filename>:Timed out.
Can anyone help us as to how to load using serial cable?
Thanx in advance,
Nikhil
DISCLAIMER:
This message (including attachment if any) is confidential and may be privileged. Before opening attachments please check them for viruses and defects. MindTree Consulting Private Limited (MindTree) will not be responsible for any viruses or defects or any forwarded attachments emanating either from within MindTree or outside. If you have received this message by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change and MindTree shall not be liable for any improper, untimely or incomplete transmission.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss