Re: [ECOS] eCos tests

[Paul M. Øverby <paul dot magnar dot overby at spagat dot no>]

Downloaded newlib through cvs, configured it, and built it. Set the symlinks
as described in the post you linked me to. And rerun the gcc make with the
added parameters "all-target-libstdc++-v3" and
"install-target-libstdc++-v3".

Stopped right away with this error:

Configuring in arm-elf/newlib
*** Cannot configure here in "/tmp/build/gcc/arm-elf/newlib" when
"/src/gcc/gcc-3.2.2/newlib" is currently configured.
make: *** [configure-target-newlib] Error 1

Must admit I don't understand much of this, so I guess I need another kick
in the right direction.

Paul

----- Original Message -----
From: "Andrew Lunn" <andrew dot lunn at ascom dot ch>
To: "Paul M. Øverby" <paul dot magnar dot overby at spagat dot no>
Cc: <ecos-discuss at sources dot redhat dot com>
Sent: Monday, March 10, 2003 4:01 PM
Subject: Re: [ECOS] eCos tests


> On Mon, Mar 10, 2003 at 04:14:57PM -0000, Paul M. Øverby wrote:
> > http://sources.redhat.com/ecos/tools/linux-arm-elf.html :
>
> These instructions are for the version of GCC recommended on that
> page, ie 2.95.2.
>
> If you want to use gcc 3.x you need to do it a little different. This
> has been discussed on the list before. eg:
>
> http://sources.redhat.com/ml/ecos-discuss/2002-11/msg00018.html
>
>         Andrew
>



-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss